Got bored, took the intake off my truck and mocked it up on a block I have in my garage. I like to keep things simple. Its just some aluminum angle that has been cut and bent. 1/4 all thread is ran through and has nuts holding the coils in place. I have a space to clear my oil pressure sender. Ill slap it on the motor sometime tomorrow and see how it goes. These are not the wires I will be running. Green is bad luck.
-Tyler 2000 ECSB-370-Vic Jr-FAST 4150-244/248 .612/.615 112 lsa
looks nice,got any pics of the brackets alone?ive always liked the coil relocation look.ive done it b4 but on the fire wall,,
no wonder if allen can make the coil plug harness extension??
you can pretty much see on the second to last pic. Ill go snap another of just the bracket.
-Tyler 2000 ECSB-370-Vic Jr-FAST 4150-244/248 .612/.615 112 lsa
oh yea i see,,that be cool though...are u splicing and saudering to make the wires reach the plug?thats what i did ,but really dont want to do that on my 08',,ide like to get someone to make extensions.
My wire that goes to my coils should be long enough to reach. As for plug wires, Ive gotten a set of LT1 wires I used on Dozerdans that Im going to see if they work. If not Ill get some MSDs or Taylors and cut them to length.Originally Posted by STUNNA
-Tyler 2000 ECSB-370-Vic Jr-FAST 4150-244/248 .612/.615 112 lsa
Heres the valve covers Im going to run for now. Still have to do some repainting on them.
-Tyler 2000 ECSB-370-Vic Jr-FAST 4150-244/248 .612/.615 112 lsa
looks familiar!!! i just did the same thing today. minus moving the coils
01 Silverado
post a link to yours.
-Tyler 2000 ECSB-370-Vic Jr-FAST 4150-244/248 .612/.615 112 lsa
how did u do that lol,,must be coil covers
X2
i didnt take any pictures or nothin. all i did was painted the covers. but i do want to relocate the coils soon
01 Silverado
Posting Permissions
Reply With Quote