+ Reply to Thread
Page 10 of 51 FirstFirst ... 8 9 10 11 12 20 ... LastLast
Results 91 to 100 of 504

Thread: Official NBS 4.3v6 to GEN 3 V8 swap Guide

  1. #91
    Join Date
    Aug 2009
    Posts
    19
    I have a 2008 Silverado regular cab short bed 4x2 3.23 rear gear with v6 auto I want to swap to a v8 my 08 is apparently different from the earlier models no one can reprogram the ecm/tcm no cai nothing for it. Even though it runs smooth it lacks power what year ls motor should I look for I want to keep my cruise and a/c my truck came with an electric fan are there wiring provisions for it to be run by the stock ecm/tcm thanks for any/all help

  2. #92
    Join Date
    Aug 2007
    Location
    Honeywood, Ontario
    Posts
    6,994
    Go to a junkyard and get a wiring harness and mounts front drive accesories, any of the motors will work as long as its a 58 tooth reluctor wheel
    2006 Silverado
    Little Black Bitch

  3. #93
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Or just put a nitrous kit on it and run it with a 50-100 shot until the engine craps the bed, then put the V8 in it. You're not going to get squat for it when you sell it most likely so you might as well have some fun with it while its in there.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  4. #94
    Join Date
    Aug 2009
    Posts
    19
    I may be moving soon I live in Florida now and I may be going to Wichita Kansas. So I don't want to blow it up just yet, the motor has 4K on it I have a miser car I drive back and forth to work. I see you are from Denton I grew up in Lewisville "Home of the Fighting Farmers"
    Robert

  5. #95
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    DON'T DO IT! Wichita KS is my version of the armpit of America. I lived there for 6 months and as soon as my contract at my apartment was up I couldn't get out of there fast enough.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  6. #96
    Join Date
    Aug 2009
    Posts
    19
    It would be a promotion going to Wichita and it's closer to home than Florida

  7. #97
    Join Date
    May 2009
    Location
    hot & windy
    Posts
    1,117
    need some help...

    so the guys who pulled my motor managed to break off the nipple on the back of the intake manifold that connects to the brake booster vacuum line. i went to the parts counter today to see if i could get one & they said they thought it was a molded part of the intake. is this true? can i just get that nipple somewhere or am i gonna have to take this whole manifold off & swap it out?
    00 FRC - just top end, exhaust, and a hot-air intake
    99 Sierra - 5.3 / 5spd
    ↓ click the pic for the build ↓

  8. #98
    Join Date
    Dec 2007
    Location
    wichita falls, tx
    Posts
    3,067
    i believe it is molded to the intake
    ↓↓↓click pic to go to garage↓↓↓

    408, WCCHL92s, nelson tune,4L80e 3600 Circle D,
    Intro Radicalli's

  9. #99
    Join Date
    Jan 2009
    Location
    Augusta, Ks
    Posts
    3,246
    Let us know when you get to wichita. There are a few of us located there.
    2000 Silverado ECSB- 5.3 CAI, Pacesetter LTs, ORY- Pipe, Magnaflow XL, E-fan, Ported T/B , Nelson Tuned, Built 4l60e, Circle D Stall, 3.42s G80, 2-4 Drop, Hertz Highs, Rockford 501s

    2004 Buell XB12s

    Quote Originally Posted by LamboDoNoMo View Post
    "Never give up, NEVER BACK DOWN!!!"

  10. #100
    Join Date
    Jan 2009
    Location
    Augusta, Ks
    Posts
    3,246
    Quote Originally Posted by RedHeartbeat View Post
    DON'T DO IT! Wichita KS is my version of the armpit of America. I lived there for 6 months and as soon as my contract at my apartment was up I couldn't get out of there fast enough.
    Thanks Greg.....If its the armpit the whats augusta ....the nipple?
    2000 Silverado ECSB- 5.3 CAI, Pacesetter LTs, ORY- Pipe, Magnaflow XL, E-fan, Ported T/B , Nelson Tuned, Built 4l60e, Circle D Stall, 3.42s G80, 2-4 Drop, Hertz Highs, Rockford 501s

    2004 Buell XB12s

    Quote Originally Posted by LamboDoNoMo View Post
    "Never give up, NEVER BACK DOWN!!!"

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts