I just bought a new Escalade cluster to spice up my interior a bit. Does anyone know where I will have to go to get it programmed? The dealership says they wont do it, and told me I would have to send it to GM. BTW, here is what it looks like.
http://chevytruckworld.tenmagazines.com/ga...isj6/178767.jpg
Chris
2009 Silverado, HPTuners, all stock.
As we used to say in the olden days, Very BossWhat is it that needs to be programmed? Is it some kind of calibration set up?
Base: 2004 Victory Red Silverado 1500 2WD RCLB, LR4, 4L60E, 3.73, HD Suspension, P245/75R16 Tires
Mechanical/Performance: Nelson 93 Octane Tune (See Slamma's CarDomain.Com Page for more details)
go to another dealor. they should be able to do it.
old mod list: H/C/I/N/E/G 408
new mod list: 5.3, gears/posi, mufler and tune : (
Auto Craft Electronics
1612 Hutton Dr. #120
Carrollton, TX 75006
(800) 336-3998
Zener Electronics
10535 Harwin Dr.
Houston, TX 77036
(800) 487-0605
I used Zener to do mine. I think it cost $35.
No more trucks, but this is what I used to have. 2000 GMC Sierra, 6.0L-LQ4, Built 4L60, LS6 Cam, The Other Guys Headers, 3 inch exhaust and 7 chamber flowmaster, 43lb injectors, Nelson Tuning, Drop - 3/4 McGaughys Spindles, Bell Tech Shackles & Hangers. Best time 13.59 @ 106
Jenings Chevrolet is the same place I ordered my SS cluster form, also got the fog lights there. There is a sticker you can get and have a GM Tech fill out and put in the door jamb. It's part number 10443718, $9.13 on gmpartsdirect. If you do get it programed, make sure they change the hours too.
03 SIlverado LS SCLB 4.8 w/ 3.42 rear, K&N FIPK, mild catbak duals, vette servo and a few other things added.
http://img.photobucket.com/albums/v2...hughes/600.jpg
i ordered a cluster but its just a stock one because my odometer light went out and the gm guy said i needed a new cluster do i need to do anything special or just plug it in its the same one that i already have in there stock
1999 GMC Sierra black reg cab short bed SLE Z71 5.3 <--CARDOMAIN PICS
NELSON 93 hot tune, 02 PCM, VOLANT Ram air intake, MSD wires, ACdelco iridium plugs , Edelbrock ceramic shorty headers, jegs off-road y pipe, Dynamax int pipe, 3" Magnaflow Exhaust with turndown, EGR removal, throttle body bypass, vette servo, long servo pin, performance 4th apply piston, B&M shift kit, SLP 160* thermostat, LS1 Fans, NELSON harness, ported and polished throttle body (did it myself, for free lol)..... _______? cam is next as soon as i stop spending all my money
Looks good man.
04 SC Sierra 5.3L- 40 series Flowmaster w/ 3.73's and limited slip from the factory, 2/4 drop & 20's--- Nelson 93 Octane Tune
Just plug it in! I coulda sold you mine! Oh well, they are very easy to take out and put back in, just pop off the front of the dash and there are just 4 bolts to pop out and it slides on out! I am putting blue lights in the cluster and the rest of the dash will be red, that way it will match my aftermarket radio! The two lights in the door and the dome light will also be blue.
Chris
2009 Silverado, HPTuners, all stock.
hey chris yours got trans temp??? if not oh well how much?? how many miles?
1999 GMC Sierra black reg cab short bed SLE Z71 5.3 <--CARDOMAIN PICS
NELSON 93 hot tune, 02 PCM, VOLANT Ram air intake, MSD wires, ACdelco iridium plugs , Edelbrock ceramic shorty headers, jegs off-road y pipe, Dynamax int pipe, 3" Magnaflow Exhaust with turndown, EGR removal, throttle body bypass, vette servo, long servo pin, performance 4th apply piston, B&M shift kit, SLP 160* thermostat, LS1 Fans, NELSON harness, ported and polished throttle body (did it myself, for free lol)..... _______? cam is next as soon as i stop spending all my money
hey chris we should race lol we have like the same setup just about
1999 GMC Sierra black reg cab short bed SLE Z71 5.3 <--CARDOMAIN PICS
NELSON 93 hot tune, 02 PCM, VOLANT Ram air intake, MSD wires, ACdelco iridium plugs , Edelbrock ceramic shorty headers, jegs off-road y pipe, Dynamax int pipe, 3" Magnaflow Exhaust with turndown, EGR removal, throttle body bypass, vette servo, long servo pin, performance 4th apply piston, B&M shift kit, SLP 160* thermostat, LS1 Fans, NELSON harness, ported and polished throttle body (did it myself, for free lol)..... _______? cam is next as soon as i stop spending all my money
Posting Permissions
Reply With Quote
