i'm mike,38 and am building a 2500 seris 2000 chevy.it has a tired 350 in it and just bought a 5.3 and trans with a 5 wire setup.i ordered the mounts on ebay 2 hours ago.i need 2 figure out how to make my speeo work and would like 2 make the cruise also work.
allen or jon could probably help you with that. they got my cruise working perfectly.
We did a swap like this a while back, but the 7.4L was replaced.
The install is easy.
From the pcm, take the vss signal and take it straight to the speedo signal wire, same with the tach.
Use your old oil pressure sensor and install it on the block, then take the signal wire to the gauge.
The volt gauge will work on its own.
So will the gas gauge.
The temp gauge, you need a three wire temp sensor from a '98 camaro ls1, or use the other head hole for another temp gauge.
The cruise is easy, tap into the vss wire and feed the cruise control box the vss feed, it'll work.
good luck,
allen
Nelson Performance
FastestTruckList.com
NP on Facebook
Youtube Channel
'94 Chevy Truck: 8.9 et, 408 twins
Allen your such a pimp
2000 Silverado ECSB- 5.3 CAI, Pacesetter LTs, ORY- Pipe, Magnaflow XL, E-fan, Ported T/B , Nelson Tuned, Built 4l60e, Circle D Stall, 3.42s G80, 2-4 Drop, Hertz Highs, Rockford 501s
2004 Buell XB12s
Originally Posted by LamboDoNoMo
nice user name.....youll be know as PERMANEWB welcome
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
Welcome aboard.
Welcome where in Arky you located?
06 Intimidator SS- Tuned, CAI -DD
03 Silverado- Last incarnation 13.6... RIP
Ls1, Pnp heads, Polluter camshaft, spray, 4k stall on the way
"Seize the day like you seize your noodle" - Shin Chan
Welcome to the site...
2000 sil.ext. 5.3 / Lingenfelter Ls1 cam / LS1 valves / Ported / Milled / 35lb injectors / 80mm tb / E-fans / cold air intake / Pacesetter Cer LT's w/3"ory/ JET-DST / MSD Twister / Corvette Servo / 3.73's / 125 N2O / no cats / Flowmaster exhaust / level rear drop / Rear sway bar / SS wheels / 285/50R20 Goodyears / 05 Tail lites
Welcome! NP is the place to go for all of your swap's needs.
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
welcome. man Allen you are just busting out the knowledge. ive got to come back out there one of these days.
01CamaroZ28
10.751 @ 124.26 mph with a 1.446 60ft
ALL THRILLS NO FRILLS!!!!
B&L Racing stg 1 heads 224/581 cam.
06 silverado 6.0L VMAX LPP LT's, Volant CAI, Manaflow, NELSON TUNE.
Posting Permissions
Reply With Quote
