cam ?

[MTIARKS28]

I have a core ls1 5.7 that out of camaro. what are the specs on the cams? Can i put that in my 5.3? I need some suggestions here. im sure theres many of you that have done a cam swap b4. im all stk on the engine and its my daily driver but if im next to a f150/ dodge i wanna make sure i blow his doors off... any help would be great... i also have a 6.0 gto core also

[Frenchy]

not worth the effort IMO

[banker099]

not worth the effort IMO

+1...buy an aftermarket cam and dont waste your time with the factory ls1 cam

[G20M04C]

so what is the lift on a stock truck cam vs ls1 cam?

[Fastime09]

The cam i have is a somewhat stock LS1 grind from lingenfilter, 500/218, with the head work, injectors & programing it runs 14.90's-N/A....not to bad for a 5000lb truck.....mild, every day driver

[Fastime09]

I have a core ls1 5.7 that out of camaro. what are the specs on the cams? Can i put that in my 5.3? I need some suggestions here. im sure theres many of you that have done a cam swap b4. im all stk on the engine and its my daily driver but if im next to a f150/ dodge i wanna make sure i blow his doors off... any help would be great... i also have a 6.0 gto core also

Im more old school w/ the older carb's & dist. engine until learning about how to tune these engines, I first installed the cam did the head work & injectors and was bumbed out on the preformance, I then got a programer and then it all came together, I would rec. a programer first and work your way up...If your engine is stock and you go w/ a large cam u need to install larger injectors & be able to adjust the flow rate.

[o2camaross]

i almost want to say thats its the same cam thats in the lq4s maybe even lm7s.

[BlueZee28]

I'll sell you the stock cam from my 6.0 for $50.