how are u guys installing aftermarket tranny coolers?
where u get the fittings?
any pics?
my truck doesnt have a factory tranny cooler, the lines go in the radiator but no other cooler besides that....i searched but didnt find much info
how are u guys installing aftermarket tranny coolers?
where u get the fittings?
any pics?
my truck doesnt have a factory tranny cooler, the lines go in the radiator but no other cooler besides that....i searched but didnt find much info
Check those Engine Oil, Transmission and Fuel Coolers
www.Boostp.com
- Procharger P1SC 3.7 Pulley, Ported Heads, Hooker Long Headers, Lingenfelter GT2-3 Camshaft, Double Springs, upgraded clutches, Trans-go, Corsa Exhaust Sport series, Twin Electric Fans, 2 Flex-a-Lite Gear Coolers, Msd Conductors, NGK TR6, HP tuned.
You have the factory cooler in the radiator but not the auxiliary one I guess. There is a GM kit that I'm sure is over-priced and no one uses but I'll look....
yeah...thats what i was trying to say, but the way i said it wasnt very clear....Originally Posted by GasGuzzler
yeah, i found that kit, if i could just get the lines it would be great, i already have a trans cooler, its just sitting in the shop though, not doing much good there, i thought someone had to make an install kit or something...
Got mine from the salvage yard, all the caddies with the Northstar have oil coolers and they are the plate type rated for 28k pounds for 5 bucks.
'86 Silvy- '06 6.0/4L80E, K&N, 2.5 X-pipe Magnaflows, 20" Foose Wheels, Auburn Pro, 3.90 Richmond Gears, and the list is growing!!!
ok i have a B&M trans cooler at the house, i just need to install it....i found this link, i want to do this!!
cooler install
Last edited by banker099; 12-30-2008 at 03:19 PM.
im feeling productive today, i think i will mount it up when i get off work and just feel it out from there, ill post up picks of the progress later
I had a tru-cool cooler to install and there were no fittings. The local Orielly store had universal prebuilt brake and fuel hoses hanging in the back. I just tried a few until I found the ones that fit. A cut to make one into two, a couple of bends, hose clamps and rubber hose and it was ready to install. Simple 3/4" x 1/8'' flat bar, a drill, nuts and bolts can make any mounts you need.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
so, do the trans lines have the same flare as a brake line?
Look here banker099: http://www.ls1truck.com/forums/mecha...ns-cooler.html
"ALisSa1 Silverado"1990 Chevrolet RCSB● 2002 Chevrolet Camaro LS1/4L60EScrimpin Ain't Easy( . Y . )
Posting Permissions
Reply With Quote
