+ Reply to Thread
Results 1 to 10 of 73

Thread: PCM or not wired right

Hybrid View

  1. #1
    03 5.3/4L60e

    96 gmc.


    well now we are cooking...so pin 12 should be getting power? Is that 12v switched or constant 12v


    something else we noticed, with the new harness there is a purple I believe, marked crank, we got nothing from that wire, maybe its a signal wire, not sure, but I do know, we got nothing power or ground wise from it regardless of key position.




    The fuel pump was working from the first attempt at a start (even with the bad pedal sensors). We heard it come on each time, checked for pressure, its there, smell of fuel always there for a few minutes after cranking.
    Last edited by LSXmyford; 08-12-2008 at 05:31 AM.
    LSX conversions, so easy a caveman can do it.

  2. #2
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    purple crank wire usually goes to the starter solenoid if you hooked up the starter relay setup in the harness. I normally use the factory starter wire.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts