welcome
welcome
'92 GMC reg. cab, step side. 7.32@ 92.3. SOLD
http://videos.streetfire.net/video/d...d700c6401f.htm
New project: '00 S-10 ext. cab, ZQ8, 370, T-56, daily driver.
Hello and Welcome!!!!!!!!!!!!!!!!!!
Glad to have you here
Her name is A Meli-
"If everything is under control, you are going too slow."- MA
welcome
Cool. Nice to have you on the site.
Slowest in Oklahoma...
I don't get to much computer time so sorry i'm slow to post up responses. Thanks so much for the warm welcome,eveyone here is great. To answer some of the questions It is out of a 97 fbody. It has been stroked to a 383 using Scat crank, rod, and JE pistons. Stock ported heads with a 224 230.535 .540 comp cam sporting 1.6 rockers. A TC76 is hopefully not to far into the fuuture. Red I got my M/T radials but can't make it to the track this weekend because of my brother-in-law's wedding. Hopefully next weekend weather permitting, so get yours together and come out.
Damn, I bet that "beater" of your can move pretty well. Did you build the motor for FI? That cam looks kinda small and how far did you port the heads? How much did you raise the compression ratio?
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
When I built the motor i did not have FI in mind, but I used good parts so I think it will take 12-15psi max with 10.4:1 compression on E85. Only plan to run 8psi on the street and turn it up at the track on ocassion. The cam is alittle small for a 383 but I was trying to build a strong midrange torque motor. The port work is mild like the cam. I pull with the truck some so I didn't get to crazy with the combo.
Last edited by 88lt1; 02-04-2008 at 07:24 PM.
What are you mounting the Mickeys on?
Last edited by RedHeartbeat; 02-04-2008 at 09:07 PM.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
15x8 1985 ralleys. I didn't want to spend money on new wheels so I asked the guy I got the M/Ts from if he had any old wheels that would work. He went behind is shop to look and came back with two very rough looking ralleys. I said how much? He said their yours if you want em. FREE! That is my favorite price, so I stopped by Auto Zone on the way home for some sand paper and wheel paint. Plan on going to the track this weekend are you?
tranny is the truck is fried. Other half just came out of surgery on her back Thursday so I'm going to hang with her until she feels half human again.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Posting Permissions
Reply With Quote
