how hard is it to put a overhead console in a truck that did not come with one, and how do you hook up the lights in the con?
how hard is it to put a overhead console in a truck that did not come with one, and how do you hook up the lights in the con?
David,
2003 GMC Sierra Denali, LQ4, AWD, AWS, 4.10, Wheatley 93 tune, LT headers, GMPP CAI, BBK 80mm TB, MSD wires, E3 plugs, 160* T-stat, Flowmonster DI/DO, cutouts. Working on 4.8 heads, just purchased Comp 228R cam, 918 Springs, TI retainers, 7.4 hardend pushrods,
It would be an easy splice... Just need to make sure you mount it correctly--don't want it falling off on you as you are driving 70 mph down the freeway!
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
What year truck? I put one in my 96 GMC and it was a piece of cake. I also got a PSI mirror prototype from where I used to work, im checking into whether or not I can get more of them. RC
it's a 2006 rc. how would i need to fasten it.
David,
2003 GMC Sierra Denali, LQ4, AWD, AWS, 4.10, Wheatley 93 tune, LT headers, GMPP CAI, BBK 80mm TB, MSD wires, E3 plugs, 160* T-stat, Flowmonster DI/DO, cutouts. Working on 4.8 heads, just purchased Comp 228R cam, 918 Springs, TI retainers, 7.4 hardend pushrods,
There's a bezel and a retainer. The retainer attaches to the header with 2 fasteners I believe in your model and the bezel and electronics snaps into the retainer. I'll see if I can get some screenshots of an exploded view might take me a few days. RC
thakns man. I'll check back in a few.
David,
2003 GMC Sierra Denali, LQ4, AWD, AWS, 4.10, Wheatley 93 tune, LT headers, GMPP CAI, BBK 80mm TB, MSD wires, E3 plugs, 160* T-stat, Flowmonster DI/DO, cutouts. Working on 4.8 heads, just purchased Comp 228R cam, 918 Springs, TI retainers, 7.4 hardend pushrods,
here is a write up on another forum of how to do the install
Overhead Console Install Instructions - FSC Forum
I mounted a S10 blazer's overhead console in my S10 pickup (pickups never came w/ them). I still have to wire it up. I mounted it using JB Weld.. I JB'd two bolts to the roof & screwed a screw into the support at the front to secure it all. Maybe you'll have to do something close. Just be sure to measure, measure, measure & then do it.
2004 Silverado
1957 Chevy truck
1953 Ford sedan
1924 model T 2dr hard top
Posting Permissions
Reply With Quote
