Hi all, new to the forum, I have just fitted a 2003 5.3 to a 52 chevy pickup. All went well and it is up and running but I have no throttle. When I got the engine I didn't get the loom from the pedal to the TAC. I connected it as per some info I found on line but no go. The pedal has 10 pins. In the info I have it says the 5volt supplies from the TAC are pins G,D and E, I have 5 volts from pins B,K and G. Does anyone have any info on which pin connects to which, I have tried to buy the loom but I have had no luck, I live in NewZealand and some things are a little hard to get. Thanks for any input.