-
Weirdest thing.
Well last night i was putting in my new tran and tq, well long story short. I went to go put in one of the last bolts on my trans witch happened to be the passenger top one. And for some reason it would not go it. so i got my flash light and looked dwon my trans to see if i can see why that bolt would not go it. I couldnt see much so i decided to redrop the trans to really see and this is what i found.
![](http://i261.photobucket.com/albums/ii41/vortecchevy/SP_A03001.jpg)
What were looking at here is the passenger side top bolt, the phone was tilted to the side to take the pic soo that why its hard to place it. The bottom piece is the bell housing and the top is the engine block. Well anyway what i found looked like to be a plug weld or a broken bolt off in the bolt. but the funny thing is i have no broken bolts and I know I took that bolt out since it the double nut bolt that hold the dip stick. i have no idea what happened here.
Last edited by 6.0vortecchevy; 04-17-2010 at 10:11 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules