I'm selling the first turbo kit I built for my truck. It has the Master Power T76 turbo with a P-trim .96 a/r housing, OBX branded intercooler, Tial 38mm WG with a 7 psi spring that made about 9 psi on my 5.7, and 3'' down pipe. The manifold is stainless steel and and has no cracks or anything. This kit is about 2 years old. The turbo has only been on it less then a year and has maybe 10,000 miles on it, still plenty tight. This kit make 500 rwhp on my 4.8 at 11psi with a T70, and ran a 12.21@110 at 10psi on the 5.7 with the MP T76 (5400lbs race wieght). Had plenty left in it, but broke the tranny when I tried to step it up to 13psi. The blow off valve is a 1" Bosch bypass valve off of a Volvo, It is open at idle that's why it has the breather on it. Everything is in good shape and ready to go.
The intercooler piping is setup for a 28" radiator and comes up in between the radiator and the PCM, so it you have a 32", you will have to rerouteing the piping on the drivers side from the intercooler to the throttle body.
$3000 plus shipping
Let me know if you have any questions.
Reply With Quote