1992 4X4 Blazer Build

[myzterray]

Your fuel system has to support 58 psi. The old system is low pressure isn't it?

no i was told that with 96+ system works fine. the pump will support the new engine and it already has a return line. im just wondering about the connectors for the fuel lines to the intake manifold.

[Minime168]

Your fuel system has to support 58 psi. The old system is low pressure isn't it?

If you were talking to the OP, me, then yes you are correct I ha to change the pump and all lines between engine and tank. He should be fine though. He has a 2nd gen obs I have 1st. I upgraded to the walboro pump.

[Minime168]

no i was told that with 96+ system works fine. the pump will support the new engine and it already has a return line. im just wondering about the connectors for the fuel lines to the intake manifold.

Does your new engine have single line on the intake or dual line with a regulator? If it has the single I can tell you exactly what you need.

[myzterray]

Does your new engine have single line on the intake or dual line with a regulator? If it has the single I can tell you exactly what you need.

i got dual line. ones bigger than the other. then theres a third line that goes into some canister.

also i need the info for the guy who you got the throttle body from. i emailed the person who i thought it was and he said it has to be a drive by cable core to get the ported one.

[Minime168]

i got dual line. ones bigger than the other. then theres a third line that goes into some canister.

also i need the info for the guy who you got the throttle body from. i emailed the person who i thought it was and he said it has to be a drive by cable core to get the ported one.

I'll get it to you tonight when I'm off work. And that's your charcoal canister. I removed mine :p

[Minime168]

i got dual line. ones bigger than the other. then theres a third line that goes into some canister.

also i need the info for the guy who you got the throttle body from. i emailed the person who i thought it was and he said it has to be a drive by cable core to get the ported one.

Heres the link to him http://www.ebay.com/itm/200654736584...84.m1497.l2649

He does great work really.

[Minime168]

Got my first header wrapped today. Still need to coat it tomorrow. But im pretty pleased with the way it came out.

[myzterray]

looking good.

[Minime168]

looking good.

Thanks Bud. Im hittin you up with a PM.

[Minime168]

Headers in today. Transmission mount fabled and installed. Wiring. Should be turning the key tomorrow. Still no driveshaft. But at least well see if she runs!