Started by pulling the inline 4.9 i6 and 5 speed transmission, I'm gonna need all the help I can get jajaja. I'm going to eliminate the front tank, for the rear tank I have a Walbro 3442. I have to figure out the motor mounts.
Started by pulling the inline 4.9 i6 and 5 speed transmission, I'm gonna need all the help I can get jajaja. I'm going to eliminate the front tank, for the rear tank I have a Walbro 3442. I have to figure out the motor mounts.
whoa, that sounds like a fun little project!
if you need any 5.3 to nv3500 stuff, my signature has my build thread with info.
good luck!
00 FRC - just top end, exhaust, and a hot-air intake
99 Sierra - 5.3 / 5spd
↓ click the pic for the build ↓
Cant wait for this one! I was going to be doing a s10 5.3 swap but i think ive changed my mind and gonna do my 82F150 instead
Thank you Zebra, I am going to look through your build thread, I've never worked on a manual transmission.20151119_195258.jpg20151119_195125.jpg
Originally Posted by zebra
How can I reply with pics on my phone?
don't have any fab skills so I'M gonna try this, 73-87 sliders with clamshells, plate on top is just to get an idea, its from a 1996 mustang mount, gonna have my neighbor make me a plate with 4 holes that will match the clamshell mount and a heavy stud in the middle welded.
20151119_202529.jpg
Last edited by cagodinez; 11-19-2015 at 11:16 PM.
Awesome keep us updated on the mounts
Posting Permissions
Reply With Quote