Biggins Suburban Build

[Biggins]

Figured I've doen enough things to start a build thread. This is from start up till now.
2002 Chevrolet Suburban. Bought back in August of 2011 for $10,000 with only 63,500 miles from a vet that only drove it on vacations and when needed for bigger tasks. All the rest of the time it was covered up in the garage. He was the original owner.



First thing we did was take it on a 2500 mile trip with the family


First mod I took my system out of my 2001 yukon xl and bought new door speakers and put it in the burb.





Then I got the windows tinted, 20% up front, 5% over factory on the rest



Then I tinted the tails and front bumper lights

[Biggins]

Then I got headers and a flomaster super 44 for it






I also took my CAI out of my xl and put it in the burb


Then I painted the grill shell and bowtie






Then I bought 5000k HIDs from DDMtunning (dont have pics of them installed)


Then put leds into the cluster
Before

After


Then bought MSD 8.5mm wires and high flow MAF sensor




Then LED tails

[Biggins]

Also put LEDs in reverse and plate bulbs



Then an Underdrive Pulley
Old

New


Then the Big 3




Then put the teams sticker on


Deleted the Roof Rack Cross Rails



Then put moar LEDs in the interior

[Biggins]

Plastidipped my bumpers and side moldings.











Also did my engine cover.

[Biggins]

[Biggins]

So few more things happened

New headlights (Black Depo Projectors) and black clear bumper lights.







Then Leds and plastidipped my grille shell all black

[Biggins]

Took some better pictures after I got my HIDs in and adjusted.

[Biggins]

I got a catchcan from catchcans.com and had it and my intake tube powdercoated white.

[Biggins]

Got my 3000-3200 stall in. This fat girl dances now!! lol

[Biggins]

Old 0-60



New 0-60 with 3000 stall (didn't get that good of a launch)



With the stall it lowered my et at the track by a little over a sec and gained about 4mph. Not bad for $400

So when I first got this truck, with just an intake and exhaust it ran almost 19 at 74 in the 1/4.

Now it runs a 16.4 at 84 in the 1/4. Not bad if I say so myself when the truck weighs damn close to 6000lbs. Track altitude is 3600ft.

Current mods are:
Intake
Exhaust
Shorty headers
electric cutout
ORY
underdrive pulley
.604/.617 219/227 112LSA cam
Double springs
3200 Circle-D stall
vette servo
Tru cool 40K

Next mods:
E-fans
4.10s
Sway bars