cam suggestion for LS1 in 01 reg cab

[GraniteBlueNNBS]

01 reg cab short bed, stock ls1, 3k stall with 373 gears. Has headers with off road y pipe magnaflow muffler. Truck intake with 42lb injectors. Looking for cam suggestion will be a roll racer. All suggestions welcome.

[EL SRG]

i would go with a 224/224 high lift or 222/222 highlift reason why ls1 is 5.7 right?

[GraniteBlueNNBS]

Yea its a 5.7. I had a 224 230 588 lift in the 5.3 so im looking for something bigger

[kerrige]

If it is a roll racer then I would hit it with something like 229/233 or 231/234. You will want decent heads though to match.

[GraniteBlueNNBS]

Ill throw some 799's cut down by .030 on it

[GraniteBlueNNBS]

What about a comp 231/239 617 624 113lsa or a tsp 233/239 598 603 112lsa or a tsp torquer v2 232/234 595/598 112lsa?????

[pl4yboy]

This cam is an absolute screamer up top. Needs a lot of gear to perform down low. I was cutting low 1.8 60s and running 7.8 1/8s.

[GraniteBlueNNBS]

Thanks for the feedback guys. Allen suggested getting a custom spec cam from Pat G. Thats probably what ill do 4 now. Later when funds allow ill grab a yank 3600 stall converter and some 4.10 gears