Well I was all excited about doing the 5x4.75 lug swap on my truck and running 15's...Well the rear brakes just aren't going to clear. What are my options besides swapping to a drum brake rear axle?
Well I was all excited about doing the 5x4.75 lug swap on my truck and running 15's...Well the rear brakes just aren't going to clear. What are my options besides swapping to a drum brake rear axle?
You can grind the calipers down.
T-RAV99 GMC | 5.3 | Skinny White Guy Tuned
or just get a spacer.
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
Already been done on this truck, still wont clear the billet specialties street lites that I ordered.
hmm idk man.
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
Abandoned the idea. Maybe on the next one. Sure would have been nice.
Factory disc brakes on there? If they are, then there should be no issue with grinding the caliper down a little to get the clearance you need.
T-RAV99 GMC | 5.3 | Skinny White Guy Tuned
Install an IRS and move the rotors inboard? Kah-ching!
Narrow the rear end and move the wheel offset outwards.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Been thinking about narrowing the rear. I just need to get the truck up and going at this point tho.
Posting Permissions
Reply With Quote
