Orderd on friday hopfully wont have to wait too long to get installed. Orderd them from ron's very nice guy and good prices to us on the site.
Orderd on friday hopfully wont have to wait too long to get installed. Orderd them from ron's very nice guy and good prices to us on the site.
what ratio are you currently? rons is the best!
06ccsb, cammed, stalled, geared
3.73 stock, i figured 4.10 or 4.11 wouldn't be enough of a difference. my wheels and tires are really heavy and i really need a little more rpm on the highway to cruise 70-75 without a lot of down shifting. also in theory should be a little easier life(whats left of it lol!) on trans. and of course this decision had nothing to do with wanting to be able to roast the tires
5.3 2wd upgrades: Nelson tune, stainless lt's, magnaflow, e-fans, msd's, cai.
gears came in today, thanks ron. ordering tune tomarrow.
who is setting them up for u and when?
06ccsb, cammed, stalled, geared
gonna make a nice difference..goodluck
What rpm are u at going 70?Originally Posted by sloCaddy
3.73 stock, i figured 4.10 or 4.11 wouldn't be enough of a difference. my wheels and tires are really heavy and i really need a little more rpm on the highway to cruise 70-75 without a lot of down shifting. also in theory should be a little easier life(whats left of it lol!) on trans. and of course this decision had nothing to do with wanting to be able to roast the tires
2000*GMC longtubes nelson tune, built trans,trutrac circle d 278 mm stall 373 posi,100 shot of dope and 228 232 588 595 cam.
Thanks for the warning, hopefully I won't reach the limit of driveshaft.
With the 3.73's I was turning about 2100rpm's
What about now with the 4.30s
2000*GMC longtubes nelson tune, built trans,trutrac circle d 278 mm stall 373 posi,100 shot of dope and 228 232 588 595 cam.
Haven't had on the highway yet, and ill need to install retuned pcm for accurate mph.
Posting Permissions
Reply With Quote