Smith Racecraft Assassin Traction Bars

[phantom405]

Smith Racecraft has come up with another alternative to Cal-Tracs for us truck guys.

It's their Assassin bars that are on many of the 7 second drag radial and other small tire cars around the country.

The adjustment on these things is unreal! And installation will be easier since the front bolt on the leaf springs won't have to be removed. The price is also very competitive to even homemade units I've seen. I have yet to install these, but will be in the next few weeks.

Check them out here. If you have any questions, give them a call. Real nice and knowledgeable group who have built some of the fastest cars in the country.

[phantom405]

They're also local to you DFW guys...

[kerrige]

Prices? website?

[Botlfed]

Gonna try and get rid of that bounce.

[phantom405]

Prices? website?

http://www.srdparts.com/index.php?pa...emart&Itemid=1

Gonna try and get rid of that bounce.

The bounce don't have anything to do with the bars...I have the fix for that too though

[kerrige]

Wow that's a very reasonable price.

[CHEVROLADE]

http://www.srdparts.com/index.php?pa...emart&Itemid=1


The bounce don't have anything to do with the bars...I have the fix for that too though

this is the only reason i bought cal tracs to take care of the wheel hop i had....it took care of it......
what else could take care of wheel hop cause im thinking on selling these cal tracs

[phantom405]

Don't throw them on expecting to dead hook on the street if you make any kind of power. I was doing a pimp juice burnout and then leaving on motor dead hooking. By the time i sprayed it off the line there was a decent amount of rubber down. There is a ton of adjustments on these bars, you'll just have to find where your setup likes it best

Just to let you know, i have removed my overload and trimmed the second spring about an inch and reclamped it to get everything where it needs to be. You don't have to do this and may not even need to, but i did

[slowxcab33]

Dang man!!!!! That was leaving on the motor the first few passes? That thing is building some power man.

[00Z71]

Don't throw them on expecting to dead hook on the street if you make any kind of power. I was doing a pimp juice burnout and then leaving on motor dead hooking. By the time i sprayed it off the line there was a decent amount of rubber down. There is a ton of adjustments on these bars, you'll just have to find where your setup likes it best

Just to let you know, i have removed my overload and trimmed the second spring about an inch and reclamped it to get everything where it needs to be. You don't have to do this and may not even need to, but i did

I know what you mean, I am just looking for a little improvement.
What tire are you using?