New From Mesquite,TX

[LGC]

Hey my name is Chris i am from Mesquite, Tx and in a car club Freaks of Nature. I just picked up a 5.3L for my 85 s10 xcab bagged and bodydropped on 20s. Picked up motor for $150. It has just about everything minus cam and front parts. It has Intake, throttle body, injectors, fuel rail, 702 heads, rods, pistons, oil pan, and few other parts. What i am wondering is can i bore it out to a 6.0? If so will it be to much? If i leave it a 5.3 what are the upgrades that i can do that is cheap and will get me to 400rwhp and 370lb-torque? Is a 4l60e or a 4l80e better? I have a friend that will sell me a 4l80e (i think its an 4l80e) for $200 i kno its a good deal. Please let me know what u think.

[T-Stark]

welcome to ls1truck from rockwall tx, the 5.3 can be bored out to a 5.7 then you could stroke it to make a 383 but i dont know what power to expect from doing that you would have to wait for someone to chime in

[LGC]

I am just wondering. It doesnt have to b big power. Its not goin to b a daily well right now i say that. I am looking for a few options b4 i start goin at it. Does ne1 make motor mounts that will work in a 85 s10 for a 5.3?

[lechez71]

welcome to the site! there are many motor adapter plates for an ls swap, not to sure about in a s10 though since they never had v8. seen some ls swaped s10 so im sure someone makes them.

[sierraman]

call transdapt, they make a full kit

[6669c10]

Welcome to the site