I was thinking about doing a little interior painting.
Maybe just the driver side a/c vent area where the lights switch is at and the section around the radio. Thinking painting them gloss black, like the exterior paint of my truck.
Any advice would be greatly appreciated, like what grade of sand paper to use if any, or paint promoter. Also, what paint/clear would be recommended for this interior job? Thanks
Last edited by blackjack325; 08-10-2010 at 08:50 PM.
2008 GMC Sierra
1998 GMC YUkon 4X4
2007 Kawasaki Vulcan 900 Custom
i have been wanting to do the same, i found this online
http://67-72chevytrucks.com/vboard/s...d.php?t=332106
had some good info, or this thread
http://www.ls1truck.com/forums/appea...-dress-up.html
this guys make some good stuff
http://semproducts.com/Catalog.asp?prod=190
thanks for the info,
went to NAPA yesterday and with my paint code, they were able to make my onyx black paint in a can... which i think is pretty cool and seperate can of clear.
The surface of the areas I wanna paint are pretty smooth already, im wondering if a scuff pad will be enough "sanding" to get some primer on them?
2008 GMC Sierra
1998 GMC YUkon 4X4
2007 Kawasaki Vulcan 900 Custom
Yes. I would use red scotch brite then adhesion promoter then primmer.
DANIEL CAMMED SS 13.46 @ 98.17-- 8.58 @ 80.31
2003 Silverado SS / LQ9 6.0L / Wheatley 93 Octane Tune / 224/228 .581 .588 110lsa / Patriot Gold Dual Springs / Comp Hardened Push Rods / Circle D 3800 stall / Pacesetter LT's / 4:10 Gears / Transgo HD-2 Shift Kit / K & N Cold Air Intake / Corvette Servo / Aeroforce Interceptor / Autometer Narrorband(Wideband on the way) / Mobile 1 Synthetic / Single Chamber Flows with X Pipe / Cats Delete with Cutouts
thanks, i figured that would work.... i still need to buy that adhesion promoter and primer.... im thinking, auto zone?Originally Posted by Red03SilSS
2008 GMC Sierra
1998 GMC YUkon 4X4
2007 Kawasaki Vulcan 900 Custom
Paint store
DANIEL CAMMED SS 13.46 @ 98.17-- 8.58 @ 80.31
2003 Silverado SS / LQ9 6.0L / Wheatley 93 Octane Tune / 224/228 .581 .588 110lsa / Patriot Gold Dual Springs / Comp Hardened Push Rods / Circle D 3800 stall / Pacesetter LT's / 4:10 Gears / Transgo HD-2 Shift Kit / K & N Cold Air Intake / Corvette Servo / Aeroforce Interceptor / Autometer Narrorband(Wideband on the way) / Mobile 1 Synthetic / Single Chamber Flows with X Pipe / Cats Delete with Cutouts
what do the paint code cans cost?
04 ecsb 5.3- perfectly tuned by Nelson perfomance, Pacesetter longtubes, 100 shot n2o from NX, cold air intake.
03 rcsb charbroiled (race truck eventually)
paid $45 bucks for a can of matching body onyx black and a can of clear.....
ill try to start doing some of it this weekend
2008 GMC Sierra
1998 GMC YUkon 4X4
2007 Kawasaki Vulcan 900 Custom
Posting Permissions
Reply With Quote
