what is the best company to go with?

[2003silveradobell]

i have an 03 silverado ext cab 4.8.. i wana do a 4-6 drop, and cant decide on which company to go with. i dont mind spending the money at all, i just want a good ride.

[Frenchy]

McGaughy's. This thread can be closed now.

[2003silveradobell]

lol ok... i know a repetative question, but why not djm, or belltech

[SmokinRice]

I have the DJM 4/6 with the upper and lower control arms. I have had the kit on for over 10 years now and it still in great shape. I had a friend put a McGaughy's 4/6 on his 05' and the DJM kit was lower in the front. Both are great kits, just 2 different ways to drop the front. If, you go with DJM I strongly reccomend the upper control arms for alignment.

[Frenchy]

Mcgaughys spindles are better they're the same height as OE so it keeps the geometry in spec and with Belltech spindles you lose a little turning radius. Springs is springs, shackles and hangars are the same. I've heard too many bad things about DJM to even consider them. Welds cracking etc.

[SmokinRice]

If you want a true 4/6 out of a McGaughy's kit you need to get the 5/7 drop. But everyone has their own opinion and way they want their truck to look.