well I am wanting to cam my 07 nnbs.. my mods are in the sig. no motor work has been done. it lacks on the bottom end even with the 4.10 gears so I am wanting a good low/mid cam. any suggestions on cams you guys have seen in action and perform well? also reccomendations on where to purchase. Thanks guys/gals!
2007 NBS silverado, DJM 4"-6" drop, Magnaflow muffler, Volant cold air, Richmond 4.10 gears, SLP underdrive pulley, Diablosport P.O.S. tuner. TURBO SOON TO COME!
im not an expert but i saw M3SRT's truck and i beleve in his cam choice as i had this cam in mind even befor i saw his vids,and he proved me right
spec
TSP 220\220 of duration , .581\.581 of lift , and 114+2 lsa
with bolt ons he did make this
YouTube - 2007 2008 2009 Silverado Driveshaft EXPLOSION on Dyno Too Much Power
check on the thunder racing website they have all sorts of diff cams for all types of applications
2008 GMC Sierra SLE....370ci LY6 with some goodiesSOLD
1995 C2500- LS1 swap with a mp112
build thread- http://www.ls1truck.com/forums/lsx-t...-ls1-swap.html
Comp LSR cam: 215/224 .604/.610 112 107. Makes the best low/mid torque on desktop dyno, without leaving too much to wish for at the top end.
GET OUT OF HERE WITH THAT RICER MATH!
Originally Posted by pl4yboy
gotta be careful with that much lift.
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
I know it's kinda high lift, but that's what the cam specs are from Comp. It should be ok for clearance though, right?
GET OUT OF HERE WITH THAT RICER MATH!
pretty sure that wont work in a 5.3
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
It will be very very iffy in a 5.3, depending on the valve events. And ditch the handheld.
2006 SilveradoLittle Black Bitch
i got a custom speced cam with more lift than that for the 4.8
it will be fine with supporting springs/pushrods
I did ditch the handheld.. lol I just got my computers from Nelson Performance last week. put them in today. feels better now except for trans slipping on 1-2.. lol guess my tranny build will come sooner than thought!
Posting Permissions
Reply With Quote
