+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 28

Thread: New guy with boosted ss from montana.

Hybrid View

  1. #1
    Join Date
    Jan 2009
    Posts
    17

    New guy with boosted ss from montana.

    Im new to this forum. I have a 2003 silverado ss. It has a detroit speedwork front mount kit and tons of other stuff. i just figured id say hi to everybody.


    It was a little dirty at the time of the install but heres pic in the truck.

  2. #2
    Join Date
    Sep 2007
    Location
    Texas
    Posts
    5,301
    montana? hanna montana?

    Welcome to the site, good lookin truck

  3. #3
    Join Date
    Dec 2003
    Location
    Azle,TX
    Posts
    3,682
    Welcome to our happy little truck site!
    Vortec Performance Tuned
    LQ9 built 4L60 LTs and a billion miles on the speedo!

  4. #4
    Join Date
    Dec 2008
    Location
    Newark, Delaware
    Posts
    343
    Welcome to the site. What are the full specs on the truck?
    -RJ
    2K2 Silverado
    Who gives a damn any way??
    Black Bear Performance Tuned
    60'-2.485
    1/8-10.324@69.82
    1/4-15.88@89.10

  5. #5
    Join Date
    Jan 2009
    Posts
    17
    Quote Originally Posted by Chevytruck View Post
    Welcome to the site. What are the full specs on the truck?
    Its an 03 silverado ss. I had an LQ9 but the guy who built my motor ordered the wrong pistons for the LQ9 rod he ordered press in piston pin instead of floaters and so he ended up useing 5.3 rods so now i have a new LQ4. it has a street fighter level 2 tranny and TC from TCI. detroit speedworks frount mount turbo kits with a T88 upgraded turbo and tail BOV and WG. nelson performance pcm tuned to 10psi. i have a zex wet kit for it im only puting a 50 shot on it. innovative wideband and to monitor everything i have autometer gauges.

  6. #6
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Sweet!

    Welcome
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  7. #7
    Join Date
    Feb 2007
    Location
    Fort Worth
    Posts
    9,578
    Quote Originally Posted by shawnss View Post
    Its an 03 silverado ss. I had an LQ9 but the guy who built my motor ordered the wrong pistons for the LQ9 rod he ordered press in piston pin instead of floaters and so he ended up useing 5.3 rods so now i have a new LQ4. it has a street fighter level 2 tranny and TC from TCI. detroit speedworks frount mount turbo kits with a T88 upgraded turbo and tail BOV and WG. nelson performance pcm tuned to 10psi. i have a zex wet kit for it im only puting a 50 shot on it. innovative wideband and to monitor everything i have autometer gauges.
    DAAAAAAAAAAMN GINA! (in my best Martin Lawrence voice)
    Freakin nice fool! Only a LVL 2 tranny? WOW. And it handles it fine? I have never known for a LVL 2 to be able to handle a 88mm turbo on an LQ4. You must be lucky!

    2000 ECSB 6.0L
    TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's

  8. #8
    Join Date
    Jan 2009
    Posts
    17
    Quote Originally Posted by txarkitekt View Post
    DAAAAAAAAAAMN GINA! (in my best Martin Lawrence voice)
    Freakin nice fool! Only a LVL 2 tranny? WOW. And it handles it fine? I have never known for a LVL 2 to be able to handle a 88mm turbo on an LQ4. You must be lucky!
    yeahs its my second one the first one only lasted about a 1k miles but it was a factory error so they fixed it free of charge. ive only put about 2k on the new one. i only drove it 1500 miles in 08. it mostly sits in the garage. i plan on doing a flt level 5 or an 80 swap but im waiting for the right time. my wife has been in school for the last 4 years now. so im glad shes let me do what ive done so far. when she get out it will be a whole new truck. 2 incomes will be nice again
    Last edited by shawnss; 01-27-2009 at 09:43 PM.

  9. #9
    Join Date
    Sep 2005
    Location
    Austin Tx.
    Posts
    13,138
    welcome to the site! that thing is a beaut
    1951 3100
    1984 C10

  10. #10
    Join Date
    May 2008
    Location
    Southwest AZ
    Posts
    79
    Welcome....Nice set-up...

    2008 2WD Ext Cab 6.0 VMAX--MODS...CL MAF OnlyTUNE w/AFE CAI, Corvette Servo, Flowmaster 50 Series, Innovative LM-2 WBO2
    1998 S-10 4.3 V6-0411 PCM-Crower(Cam, Lifters, Rockers) JE Pistons, T-56 6 Speed, Innovative LM-2 WBO2
    [B]EFI Live FlashScan V2 & AutoCal[B]

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts