Installing 2007 5.3/4l60e in my 1948 Chevy pickup. I am not using power brakes.....so how do I remove the fitting and fill the hole. Open for any suggestions.
Installing 2007 5.3/4l60e in my 1948 Chevy pickup. I am not using power brakes.....so how do I remove the fitting and fill the hole. Open for any suggestions.
push in the collar that is around the fitting.
Nelson Performance
FastestTruckList.com
NP on Facebook
Youtube Channel
'94 Chevy Truck: 8.9 et, 408 twins
push the red collar towards the intake manifold until it touches then pull on the fitting. should slip right out. then find a plug from a truck/car that had hydroboost and just push it in. then your on your way
Like Tumbler in "Gone in 60" I'll drive anything with wheels or without
My 95 ECSB LQ9 build thread - http://www.ls1truck.com/forums/lsx-t...to-95-obs.html
CALI LEGAL ENGINE SWAP!
Stock 03 LQ9, DBW, 95' 4l80e w/ Transgo shift kit, 2010 50# GM injectors, 2800 Circle D stall, Spectre CAI, Upgraded trans cooler, Home-made E-fans/shroud, Dual EP-381 fuel pumps w/Home-made hotwire kit
NEXT ON LIST: Dual Battery setup, CAM/Valvetrain upgrade, Build my own rear mount turbo, TRU-TRAC, HIT THE STRIP!!!
Posting Permissions
Reply With Quote
