i have a harness and unsure which pcm to buy for it. i have a blue pcm plug and a green pcm plug. i have already pinned out the wires as well as the wire colors per pin. just need to know where they go and which pcm i should use. i have an 05 dbw tb... but thinking of changing to a cable driven tb. any help with the schematic for the harness is greatly appreciated. i believe its 04/05 for the 5.3.
thanks.
1990 mazda b2200 SFBD one off frame, 6.0 lq4/6l80e, 2002 narrowed gmfs rearend w/ discs, 2003 gm 2" drop spindles w/ stock gmfs hubs/rotors/calipers, airbagged w/ ss re7's 22x8" front, 22x10" rear
http://i253.photobucket.com/albums/h...renderinf1.jpg
Try this site
http://www.lt1swap.com/
Steve
66 Chevelle, 454, 200r4, 12.9's, 86 K5 with 5.3
sorry it has taken so long for me to thank you for that link. i have learned alot. very much appreciative of the link.
1990 mazda b2200 SFBD one off frame, 6.0 lq4/6l80e, 2002 narrowed gmfs rearend w/ discs, 2003 gm 2" drop spindles w/ stock gmfs hubs/rotors/calipers, airbagged w/ ss re7's 22x8" front, 22x10" rear
http://i253.photobucket.com/albums/h...renderinf1.jpg
Posting Permissions
Reply With Quote