I was wondering if anybody could get me a pic of how your exhaust tubing goes to the tips in the roll pan. I just want an idea of how i need to run my pipes for my custom roll pan i built.
I was wondering if anybody could get me a pic of how your exhaust tubing goes to the tips in the roll pan. I just want an idea of how i need to run my pipes for my custom roll pan i built.
2002 4.8, MSD Ignition, 2" Rear Lowering, dual magnaflows, custom cai.
Waiting: Nelson Tune, Lt, 2/4 drop, high flow cats, TSP Custom Grind Cam
Anybody?
2002 4.8, MSD Ignition, 2" Rear Lowering, dual magnaflows, custom cai.
Waiting: Nelson Tune, Lt, 2/4 drop, high flow cats, TSP Custom Grind Cam
i dont have a picture but it goes over the axle, under the frame, and out and around the outside of the shackle, the pipe on the tips is off to 1 side and is 2 1/4" inch pipe about 10 inches long and shrunk in the center to about 2" so it fits around the shackle, im having mine redone to try and fit 2.5" stainless on there with my corsa sport, its the last thing i have to finish. i just PRAY it fits or ill be bummed. but sorry no pics yet.
09 CREWCAB LTZ SILVERADO, 6.2, SIX SPEED, CAI,
ok your description makes sense. I kinda have the image of how its run. here is a pic of the roll pan i built. i know its a little different than the one on the rst but for my first custom build job its pretty close. im gonna have to get underneath during shop class and see if i can run the piping kinda like you said. but whenever you get around to it a picture would be awesome. Thanks for your help
2002 4.8, MSD Ignition, 2" Rear Lowering, dual magnaflows, custom cai.
Waiting: Nelson Tune, Lt, 2/4 drop, high flow cats, TSP Custom Grind Cam
Posting Permissions
Reply With Quote