I have read that these headers work well on a 4x4 set up. I am planning on doing headers and exhaust in the coming weeks is there one set up that will work better with these Single in Single out, true duals ect..
And does anyone have any recommendations on which muffler to go with..
I know its kind of a loaded post but thanks I just want to set it up right the first time.
Tom
I should mention that I'm not committed to obx I have just heard they work well..
OBX is a good system. The driver's side is a little weird, but it is do-able... Since it is 4WD, you might have to do a little fabricating to get the driver's side in there due to the front driveshaft...but it will work!
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
I like most have the pace setters. I had to 'fabricate' the y cause it hit front drive shaft. ONLY because truck is lifted and front diff is lowered 5 inches. Also, beware the snapping mainfold bolts!!!! snapped 3
2013 CC 5.3
81 C10 LS1 project
Just don't be retarded with it...DER DER DER!Originally Posted by tanz45
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
I haven't looked at it yet but what exactly did you have to fabricate.. I only ask because I don't have access to welding gear.
The Borla mufflers sound goooooood...
They fit just fine on my brothers 02 Z71. Pacecetters with ORY.
Anyone have a sound clip on a 5.3...
Posting Permissions
Reply With Quote
