I have heard you can put 8.1 liter injectors into a 5.3 liter. Has anyone done this or even know if it is possible? How hard is it, and what all components do I need to do this?
I have heard you can put 8.1 liter injectors into a 5.3 liter. Has anyone done this or even know if it is possible? How hard is it, and what all components do I need to do this?
The 8.1 liter marine injectors are a direct plug-in replacement for 5.3 and 6.0 liter truck engines. The GM part # for the Multec 44# injector is 17113739. They're available from several sources for about $400 for a set of eight. It's not difficult to replace injectors and no other components are needed to install them.
42lb 8.1L Truck Injectors (direct swap)
380.00 plus shipping
call us and order them today
210-626-0278
Her name is A Meli-
"If everything is under control, you are going too slow."- MA
is there any gain from injectors alone?
Step 1. crus at it.
Step 2. get a hammer.
Step 3. torch it.
Tired ol' 5.7, 5.3 swap in progressHandle every stressful situation like a dog.If you can't eat it or hump it.Piss on it and walk away.
mods:2004 sierra ext sb,20s ,big brake kit w,hawk pads,air bagged,2006 6.0 lq4 swap,vortec supercharged10psi, air to water intercooled w/ dual electric fans on it ,snow meth injection kit,60lbers, e-fans ,big radiator swap ,cam 218 /222 548/550 comp .hardened prs .1.85 comp roller rockers ,guideplates ,crane double springs,trans 4l65e built .pacesetter l/ts true duals w/x pipe and magnaflows,14 bolt rearend swap ,3.73s,aroemotive fuel pump system w/elec.fuel controller and bypass regulator a/n fittings, taylor 10.5s interceptor gauge,aem w/b a/f ,autometer boost/vac NELSON 93 OCTANE TUNED .