So I was bleeding my clutch today and when I was. pumping the pedal it got stiff. I told my friend to bleed it and it got soft but as soon as he tightened the nut and I started to pump it, it got stiff as a rock again. What could it be? Slave cylinder is new, would i need to shim it? Feels like the slave is long thanks!
What clutch do you have?
Zooms performance clutch. It has part#1377c throwout bearing.Originally Posted by LOWnEASY
And it has a 4.8 flywheel.
Is it so stiff you can't push it in or just really firm?
Make sure the connections are pushed in tight and locked! If the line to the slave is not snapped in good to the slave it will be hard like u explained! Good luck!
I cant push it in more than halfway it just gets really hard its like something is in the way.
Ill take a look thanks!
Got the clutch working again guys. The rod was actually under the fork thats why it would be hard as a rock...i put the slave rod on the fork and it works great, thanks for the help!!
Posting Permissions
Reply With Quote