+ Reply to Thread
Results 1 to 4 of 4

Thread: just got verter installed. need a little help

  1. #1
    Join Date
    Jan 2012
    Posts
    229

    just got verter installed. need a little help

    I'll Starr with my vehicle
    93 full size blazer 2 door. Lq4 4l80e
    222/226 113 +2 EPs can
    Newly installed circle d 32-3400 billet front verter
    NP tuned
    The trans now seems sloppy in the 1-2 and 2-3 shift cruising. I barely feel it changing. It also doesn't really feel like it stalling off idle. I expected it to flash up a little off idle but it starts moving fairly quickly. Do I need to get re tuned for this stall.
    Last edited by cottontop11; 01-15-2014 at 03:21 PM.

  2. #2
    Join Date
    Dec 2007
    Location
    Ponca City
    Posts
    1,606
    Needs tuned
    Slowest in Oklahoma...

  3. #3
    Join Date
    Dec 2009
    Location
    DIrty south AZ
    Posts
    1,020
    x2 retune, also with the converter under light driving the kick down isnt going to be as much like the stock one so it wont be as dramastic. hope it makes sence.
    Built 2 Run! 6XX HP/ 6XX TQ

  4. #4
    Join Date
    Mar 2003
    Location
    San Antonio, TX
    Posts
    11,038
    all we can do is tighten up the shifts if that's what you'd like. also, let erica know what mph you'd like tcc lockup.
    ideally the trans needs a shift kit, that'll make the shifts quick and firmer; we can also tune on top of that as well.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts