+ Reply to Thread
Results 1 to 10 of 12

Thread: Question for resident GM techs

Hybrid View

  1. #1
    Join Date
    Aug 2007
    Posts
    1,105

    Question for resident GM techs

    Its been a long time since i have posted here. but i know this is where i can call on factory info. i own a 2009 4.8 SCSB chevy with 4.10 gears and some mods. my transmission has been "rebuilt" twice under warranty. i have a tune on it from LSXpowersports. the first trans Dale tuned and it lasted 30,000 miles. the next LSX did and it lasted about the same. well now that im on my third go around still running the LSX tune, which i love, i feel like my truck drives different after the last rebuild. it's only been about 3000 miles and it has eventually gotten back to its old habits of rapping way out in 1st gear, every once in a while it shift harshly under moderate throttle. on the highway now it can't seem to pull it's weight up the hills, when in cruise it will lock 4th gear out for EVER it seems till i turn cruise off and force it to shift into over drive. even after it is over the hill and on flat ground for a long period. but my main concern today is i had to slow down on the highway today and then accelerate and my truck jumped rpms like 5000 and held them forever like ii was slipping i eventually let out then it went back to normal. my question is that i've never felt like GM warranty really allows a true rebuild like they only replace the bad and broke and reinstall the remaining parts. like my torque converter and misc things. is that true? my truck may be a 4.8 but god it's turned into a dog. any advise or knowledge would be great. i hate to take off all my stuff like my moderate lift and 285s but if i have to i will to have something i am capable of driving with confidence.
    2009 CHEVROLET 1500 with a MONSTER 4.8 between the frame rails!!

    Tuned by LSX Powersports ~ 4.10 ~ JBA Shorties ~ 4" Inlet/Outlet Spintech ~ Airaid Coldair
    CST 3.5" Spindles ~ Camburg Upper Control Arms ~ 2.5" CCM ~ FFR Tie Rods
    Full Throttle Suspension 3" Lift Blocks ~ Soft 8s wrapped in LT285/70/17 Silent Armors

  2. #2
    Join Date
    Oct 2011
    Location
    San Antonio TX
    Posts
    1,150
    NP tuned my truck with stock 4l60 and mods in sig and i got 77k miles of life and going. As for ur warranty question the dealership i used to work at replaced all wearable parts along with torque converter and flush tranny lines. Maybe not all do the same?


    4.8, TSP 220, 6L90 swap, 3400 Stall, 4.10s w/30" drag radial and T76 @ 16lbs.
    Best ET 11.54@114 w 1.52 60ft
    Raceweight 4905 lbs.

  3. #3
    Join Date
    Aug 2007
    Posts
    1,105
    i looked at my copy they replaced the 3-4 clutches, shell, sun gear, shaft and bearings. and thats it. cleaned and reinstalled. flushed the lines of course.
    2009 CHEVROLET 1500 with a MONSTER 4.8 between the frame rails!!

    Tuned by LSX Powersports ~ 4.10 ~ JBA Shorties ~ 4" Inlet/Outlet Spintech ~ Airaid Coldair
    CST 3.5" Spindles ~ Camburg Upper Control Arms ~ 2.5" CCM ~ FFR Tie Rods
    Full Throttle Suspension 3" Lift Blocks ~ Soft 8s wrapped in LT285/70/17 Silent Armors

  4. #4
    Join Date
    Aug 2008
    Location
    mansfield texas
    Posts
    3,512
    Ya i would have allen tune it.

  5. #5
    Join Date
    Jan 2008
    Posts
    8,031
    On my 08' I blew 2 60e's first at 3500 miles! 2nd at 13,000 but I was forced induction (4.8 magnacharger )....to me those 60s just plain suck !!
    Now My cousin who is fully bolt cammed 5.3 ,np tuned his 60e is doing badass.

    Maybe get your tune checked, go with the pros

  6. #6
    Join Date
    Aug 2008
    Location
    mansfield texas
    Posts
    3,512
    Quote Originally Posted by CHEVROLADE View Post
    On my 08' I blew 2 60e's first at 3500 miles! 2nd at 13,000 but I was forced induction (4.8 magnacharger )....to me those 60s just plain suck !!
    Now My cousin who is fully bolt cammed 5.3 ,np tuned his 60e is doing badass.

    Maybe get your tune checked, go with the pros
    yep i ran 13.6s on bone stock 60e with a 3k stall Nelson Performance tune!!!!

  7. #7
    Join Date
    May 2008
    Location
    Crowder, OK
    Posts
    8,005
    I have heard nothing but bad lately

  8. #8
    Join Date
    Sep 2008
    Location
    Arizona/Utah
    Posts
    3,939
    They supposedly moved locations among other things. They post on fb once in a while, but little else can be seen from them lately.
    ECSB 2kSierra 2wd 4.8L-K&N-HPtuners-Calspeed LT's-Magnaflow-Tahoe20's-HankookRH06

    waiting to go in... 3.90s, 214/220cam

  9. #9
    Join Date
    Aug 2007
    Posts
    1,105
    Blu you ran with them pretty hard? whats up with the LSX boys? i guess i need to save some money and get a NP tune
    2009 CHEVROLET 1500 with a MONSTER 4.8 between the frame rails!!

    Tuned by LSX Powersports ~ 4.10 ~ JBA Shorties ~ 4" Inlet/Outlet Spintech ~ Airaid Coldair
    CST 3.5" Spindles ~ Camburg Upper Control Arms ~ 2.5" CCM ~ FFR Tie Rods
    Full Throttle Suspension 3" Lift Blocks ~ Soft 8s wrapped in LT285/70/17 Silent Armors

  10. #10
    Join Date
    Sep 2007
    Location
    Ottawa, ON
    Posts
    911
    I rebuild transmissions under warranty at a GM dealer, whenever I do them we do an estimate on cost to repair vs. replace and go from there. I usually get an overhaul kit and replace all seals, gaskets and clutches, and pistons in the input housing. (on a 4L60). Usually also replace the input housing when a 3/4 goes due to excessive scoring where the clutches ride. A lot of times the boost springs will overheat and distort and they also get replaced.
    2000 Chevy Silverado RCSB LS6 5 speed, LS6 short block, 317 heads, LS6 intake, Lunati 220/224 .575/.575 112LSA cam, Edelbrock Headers, CTS-V accessory drive, Nelson Performance Custom Tune.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts