+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 30

Thread: 408.Luke Garage Sale, leftover parts from Racetruck

  1. #1
    Join Date
    Jun 2008
    Location
    Houston
    Posts
    2,348

    408.Luke Garage Sale, leftover parts from Racetruck

    Ok Guys i still have a ton of stuff leftover from my build and its got to go cus i need a megasauirt unit. Everything is OBO so if you are interested PM me an offer. I DONT ANSWER "whats your lowest doller" PM's AND YOU WILL BE IGNORED. Make me an offer, worst that can happen is i say no. Also if yall want more pics let me know, i was limited to 25...

    First up Nissan Titan Wheel $200 one center cap is missing but i will look for it at the shop. Also they are painted Chadmod green but will try to clean them up (if they will fit in the blasting box) I never ran the truck on these, they were for my AWD setup that never ran



    7.400" 3/8" pushrods. $100 These have a few hrs of run time on them. Switched cams before shoot out and needed a shorter pushrod. Warning These dont fit in all motors.



    Nitrous Bottle Bracket with adjustable angle $120
    http://www.nitrousoutlet.com/catalog...9&product=3461



    25mm 5x4.75 wheel spacers 14mm studs $100
    http://www.summitracing.com/parts/EIB-904250252/



    5.3/4.8 Flat Tops (press pin) $50 these are out of a 04 4.8L anyone looking for a bit more compression out of their 5.3 these are perfect just sway them to your 5.3 rods



    14 Bolt 9.5" ring gear set w/ rebuild kit. $300.00 all unused parts. Gears are motive and the rebuild kit is missing some shims and pinion seal but all the bearings are there. Might be willing to separate this.
    http://www.summitracing.com/parts/RAT-329K/
    http://www.summitracing.com/parts/MGR-GM9-5-410/






    Synapse Synchronic Blow Off Valve $100


    Kennedy Diesel Lift Pump (no harnesses) $100 Supply's about 3psi great for a daily driver, was on my lly for a few thousand miles. You can put two of these together for my pressure
    http://www.kennedydiesel.com/categor...bCategory2=126



    Evap Check Valve and exhaust weld in nipple, great for any catch can setup $15
    http://www.summitracing.com/parts/MOR-97800/
    http://www.summitracing.com/parts/MOR-97810/



    Autometer GS Pyrometer Gauge 0-2000egt's with a new temp probe $150




    Autometer Phantom II Fuel PSI gauge 0-100 (new) $180
    http://www.summitracing.com/parts/ATM-7563/



    04.5 Duramax Tow Mirrors. $400 These are the ones that you can extend from inside the truck and will work on 01-07 trucks but 01-02 will need to change connectors to work. One does have a few scratches on the back and a really light scratch on the mirror. They have the turn signals in them too





    Stand Alone Fuel cell for a nitrous setup $100 has foam so no sloshing




    Allison 5 Speed Shift Kit (01-05) $200




    Transgo Allison Converter Clutch pressure reducer $30
    http://www.summitracing.com/parts/TRG-A1-LU-BST-04

    Last edited by 408.Luke; 05-12-2012 at 07:56 AM.
    74 Austin Morris Mini 1000 - Daily Coil Spring conversion, lowered, Disc Brake conversion
    FOR SALE: 04 RC/LB Duramax -12 second tow pig, built Allison, Tune, and supporting mods
    FOR SALE: 03 Silverado SS -DBRods built 40X, DP, Suspension. Going for fast

  2. #2
    Join Date
    Jul 2008
    Location
    Mesa, AZ
    Posts
    5,979
    Luke how about you make me a sweet catch can from that check valve and I'll buy that.

    Or just tell Jon to mass produce them.
    T-RAV
    99 GMC | 5.3 | Skinny White Guy Tuned

  3. #3
    Join Date
    Jun 2008
    Location
    Houston
    Posts
    2,348
    Shoot, even i dont have a DBRods catch can
    74 Austin Morris Mini 1000 - Daily Coil Spring conversion, lowered, Disc Brake conversion
    FOR SALE: 04 RC/LB Duramax -12 second tow pig, built Allison, Tune, and supporting mods
    FOR SALE: 03 Silverado SS -DBRods built 40X, DP, Suspension. Going for fast

  4. #4
    Join Date
    Mar 2011
    Location
    Hamilton, Ontario
    Posts
    72
    i hate to say it but what size are those god aweful colour rims?

  5. #5
    Join Date
    Sep 2007
    Location
    Texas
    Posts
    5,301


    Limited edition only

  6. #6
    Join Date
    Jul 2008
    Location
    Mesa, AZ
    Posts
    5,979
    Quote Originally Posted by 408.Luke View Post
    Shoot, even i dont have a DBRods catch can
    Figured you would have one.

    I really am curious how much he charges for one.

    Quote Originally Posted by 89sierra View Post
    i hate to say it but what size are those god aweful colour rims?
    Those wherls are Titan 18's.
    T-RAV
    99 GMC | 5.3 | Skinny White Guy Tuned

  7. #7
    Join Date
    Nov 2007
    Location
    S.A. Texas
    Posts
    3,751
    how much for the pallets, They look really good. PM me a price on the Fittings, just shoot me an idea on them.
    Name: Mark,
    God created turbo lag so nitrous trucks could have a chance.


    http://www.ls1truck.com/forums/my-ga...tml#post274877

  8. #8
    Join Date
    Feb 2011
    Location
    Sevierville, TN
    Posts
    293
    Are the Titan wheels 17" or 18"?
    Matt

    Thanks to all American soldiers for their service and sacrifices.


  9. #9
    Join Date
    Jul 2008
    Location
    Mesa, AZ
    Posts
    5,979
    The Titan wheels are 18's
    T-RAV
    99 GMC | 5.3 | Skinny White Guy Tuned

  10. #10
    Join Date
    Jun 2008
    Location
    Houston
    Posts
    2,348
    Bump
    74 Austin Morris Mini 1000 - Daily Coil Spring conversion, lowered, Disc Brake conversion
    FOR SALE: 04 RC/LB Duramax -12 second tow pig, built Allison, Tune, and supporting mods
    FOR SALE: 03 Silverado SS -DBRods built 40X, DP, Suspension. Going for fast

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts