-
5.3 apps problems
Hi all, new to the forum, I have just fitted a 2003 5.3 to a 52 chevy pickup. All went well and it is up and running but I have no throttle. When I got the engine I didn't get the loom from the pedal to the TAC. I connected it as per some info I found on line but no go. The pedal has 10 pins. In the info I have it says the 5volt supplies from the TAC are pins G,D and E, I have 5 volts from pins B,K and G. Does anyone have any info on which pin connects to which, I have tried to buy the loom but I have had no luck, I live in NewZealand and some things are a little hard to get. Thanks for any input.
-
if you dont finds an answer some of us that have access to parts can look around for you, i wouldnt think it would cost you all that much to just buy one and have it shipped, as long as someone picked it up from a scrap yard or something.
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
-
OK thanks, I might take you up on that.
-
Give Just Chevy Trucks a call they deal with these swaps all the time and the have lots of parts. 207 457 5500
Last edited by gagliano7; 03-19-2012 at 12:35 PM.
-
Don't forget to ground the tac module itself, or it won't work.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Reply With Quote
