Installed lifters today. each lifter has a small hole on one side. I didnt know if it would be call a sprayer hole or a weep hole... either way. I faced all of them towards the front of the motor which is I believe the direction of the oil flow. If that is correct someone please give me a thumbs up
06 Intimidator SS- Tuned, CAI -DD
03 Silverado- Last incarnation 13.6... RIP
Ls1, Pnp heads, Polluter camshaft, spray, 4k stall on the way
"Seize the day like you seize your noodle" - Shin Chan
doesnt matter, the oil flows through the undercut on the lifter body under pressure. Its going to get into the oil hole no matter which way you face them.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Thanks red I didnt know if it would matter any but it made a little more sense to face the hole toward the flow to me. With that said I'll be throwing the heads on tomar
06 Intimidator SS- Tuned, CAI -DD
03 Silverado- Last incarnation 13.6... RIP
Ls1, Pnp heads, Polluter camshaft, spray, 4k stall on the way
"Seize the day like you seize your noodle" - Shin Chan
Posting Permissions
Reply With Quote