I have searched high and low and i am in need of all the adapters and blockoff plates for the swap, but cannot seem to find any part numbers.
I need the adapter for the oil cooler port on the side of the block.
I also need the adapter to ust the coolant temp sender for the 97 gauge.
And i am deleting all the emmissions so no EGR or anything will be installed. Do i need any blockoff plates for that?
Motor is an 05 lq4. Changed it to DBC. truck is a 97 1500.
Thanks
1997 ECSB Chevy 1500 2WD, Lowered, tinted, 17" Impala wheels. True duals dumped w/ no cats. Ford 9" with LS1 F-body Brakes. Hipster (ATD) 4l60E. 3000 Stall.
My Garage -----> http://www.ls1truck.com/forums/my-ga...tml#post252565
The quick and easy route for the oil cooler and coolant temp adapters is on pg 94 of S&Ps online catalog. You might be able to find it cheaper and/or drill and tap the factory block off plate.
Last edited by flattopwill; 04-03-2010 at 01:12 PM.
05 LQ4 shouldn't have EGR on it anyway. Are you just wanting the block off for the oil cooler lines on the pan?
Posting Permissions
Reply With Quote