Just bought these seats, plan to install them soon along with a custom console to hold all of the audio goodies. Ok just finished the brackets, now need a little help with the wiring. Got these from a salvage yard and have the plug ends but not sure of which wire feeds the air bags, that wouldn't be fun at all. Oh, there are out of an Malibu. Thanks for any help.
Last edited by HarleyDave; 10-22-2009 at 11:38 AM. Reason: asking for help on the wiring.
'86 Silvy- '06 6.0/4L80E, K&N, 2.5 X-pipe Magnaflows, 20" Foose Wheels, Auburn Pro, 3.90 Richmond Gears, and the list is growing!!!
Those look good! ive always been a fan of black leather!
2006 extended cab, 6.0 swap, full bolt ons SOLD
2011 ECSB, 6.2, 6 spd, 3.73, 5" lift, 33" nitto, limo tint, debadged, volant CAI, muffler delete, black bear tune 14.0 @ 98 on the 33'sSOLD
2007 TBSS AWD, cam, stall, built trans, N2OSOLD
2006 RCSB cammed LQ9, full exhaust, 3200 stall, 2-4 drop
Originally Posted by farmtruc
49 Ford F1
355 chevy / turbo 350 / 12 bolt posi / camaro subframed
Nice bro. When I get a chance. I want to put some of those in my truck
Sweet, leather is always nice!
02' 5.3 ECSB| Nelson 93 Tune | 212/218 Cam | Circle D 3200 | LPP lt's w/ ORY | Volant CAI | Magnaflow | Raceready Cutout | Belltech 2/4 | JL Audio |
Can anyone help out with info on the wiring of Malibu seat, don't want ot set off the air bags?
'86 Silvy- '06 6.0/4L80E, K&N, 2.5 X-pipe Magnaflows, 20" Foose Wheels, Auburn Pro, 3.90 Richmond Gears, and the list is growing!!!
Not sure what kind of Malibu they are out of but unless you plug something into the air bag connectors, nothing will happen.....and it would take some serious luck to get them to blow out anyway. Airbag connectors are yellow.
Thanks, I deduced the airbags were yellow(before reading your post) I did hook up the main black and red to check out and all of the seat movement is on one switch. still a lot of wires for seats. Looks like the pass. has a sensor for the airbags. If I unplug the yellow that will reduce the chance of setting them off? I would like to hookup the heat as well if not to much trouble. Any idea what size fuse that I should put in line for the power seat and the heated seats?
'86 Silvy- '06 6.0/4L80E, K&N, 2.5 X-pipe Magnaflows, 20" Foose Wheels, Auburn Pro, 3.90 Richmond Gears, and the list is growing!!!
20A to 30A BREAKER (not fuse) is typical for all power functions save heat. The bags will not blow without the yellow plugged in and the position sensor is for no/single/dual frontal deployment (in all apps) and for memory recall is those so equipped.
Thanks again for your help. So I'll unplug the yellow plug. any idea what color the heat wires are? And the thermal protection needed? All of the remaining wires are very small gage.
'86 Silvy- '06 6.0/4L80E, K&N, 2.5 X-pipe Magnaflows, 20" Foose Wheels, Auburn Pro, 3.90 Richmond Gears, and the list is growing!!!
you would need the seat modules, wiring, connectors, and switches for the heat to work. Might need the BCM, etc. Gotta know what the seats came out of to make a guess.
Last edited by RedHeartbeat; 10-24-2009 at 10:14 AM.
Posting Permissions
Reply With Quote