Ready For A Tune And Cam!!! I Have 05' 5.3 Ho Z71 3.42 Gear Any Suggestions. Should I Install The Converter Before The Tune? Thanks In Advance For The Advice
Ready For A Tune And Cam!!! I Have 05' 5.3 Ho Z71 3.42 Gear Any Suggestions. Should I Install The Converter Before The Tune? Thanks In Advance For The Advice
gt 2-3 cam and a 3000 stall. Install them all at the same time.Originally Posted by l33z71
WERD
2012 F-250 XLT/FX4 RCLB 6.7 Powerstroke
H&S XRT Pro Race(550hp/1100tq)/ 4" flopro exhaust/H&S EGT kit/SPE Full diff unlock/S&B CAI/H&S motorsports upcharge pipe kit/ DPF,CAT,EGR,UREA Deleted/Icon 3.5" Lift-Vs 2.0 shocks/PMF DSS w' Bilstein 5100s/Icon Adj Track Bar-upgraded steel bearing/RIGID LEDs/Kenwood DNX570HD w/idatalink maestro/Hertz5x7s/Memphis 12" slim/500.1 JL slash amp/Recon f250 led emblems
So Install The Cam And Converter Send Off For Tune Right? Where Do I Find Gt 2-3 Cam
No... order the tune... wait for it in the mail... get the tune and install all them at the same time. send your core ecm back in the mail. www.nelsonpeformance.com -------------------- eBay Motors: Lingenfelter GT2-3 Camshaft 350-383-427 LS1, LS2, LS6 (item 160242595281 end time Nov-16-08 06:25:59 PST) here is the cam then go turbo.
Last edited by ff_jeff; 10-27-2008 at 03:40 PM.
If your not afraid of a used cam, try and get this GT2-3:
eBay Motors: ls1 cam camshaft lingenfelter (item 260305143511 end time Oct-30-08 19:48:23 PDT)
Big slow mud truck with a TUNE!!!!!!
I thought the GT2-3 was mainly a FI cam
it is, but it makes power na untill he gets a turbo, or supercharges it.
How Much Time Are We Looking At For A Cam Swap
You can do it faster once you've done one before but I'd allocate at least 8 hours for your first time.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Posting Permissions
Reply With Quote
