408.Luke Garage Sale, leftover parts from Racetruck
Ok Guys i still have a ton of stuff leftover from my build and its got to go cus i need a megasauirt unit. Everything is OBO so if you are interested PM me an offer. I DONT ANSWER "whats your lowest doller" PM's AND YOU WILL BE IGNORED. Make me an offer, worst that can happen is i say no. Also if yall want more pics let me know, i was limited to 25...
First up Nissan Titan Wheel $200 one center cap is missing but i will look for it at the shop. Also they are painted Chadmod green but will try to clean them up (if they will fit in the blasting box) I never ran the truck on these, they were for my AWD setup that never ran
http://i25.photobucket.com/albums/c9...e/IMG_0340.jpg
http://i25.photobucket.com/albums/c9...d/IMG_0093.jpg
7.400" 3/8" pushrods. $100 These have a few hrs of run time on them. Switched cams before shoot out and needed a shorter pushrod. Warning These dont fit in all motors.
http://i25.photobucket.com/albums/c9...e/IMG_0327.jpg
Nitrous Bottle Bracket with adjustable angle $120
http://www.nitrousoutlet.com/catalog...9&product=3461
http://i25.photobucket.com/albums/c9...e/IMG_0107.jpg
25mm 5x4.75 wheel spacers 14mm studs $100
http://www.summitracing.com/parts/EIB-904250252/
http://i25.photobucket.com/albums/c9...e/IMG_0322.jpg
5.3/4.8 Flat Tops (press pin) $50 these are out of a 04 4.8L anyone looking for a bit more compression out of their 5.3 these are perfect just sway them to your 5.3 rods
http://i25.photobucket.com/albums/c9...e/IMG_0320.jpg
14 Bolt 9.5" ring gear set w/ rebuild kit. $300.00 all unused parts. Gears are motive and the rebuild kit is missing some shims and pinion seal but all the bearings are there. Might be willing to separate this.
http://www.summitracing.com/parts/RAT-329K/
http://www.summitracing.com/parts/MGR-GM9-5-410/
http://i25.photobucket.com/albums/c9...e/IMG_0285.jpg
http://i25.photobucket.com/albums/c9...e/IMG_0286.jpg
http://i25.photobucket.com/albums/c9...e/IMG_0284.jpg
http://i25.photobucket.com/albums/c9...e/IMG_0315.jpg
Synapse Synchronic Blow Off Valve $100
http://i25.photobucket.com/albums/c9...e/IMG_0305.jpg
Kennedy Diesel Lift Pump (no harnesses) $100 Supply's about 3psi great for a daily driver, was on my lly for a few thousand miles. You can put two of these together for my pressure
http://www.kennedydiesel.com/categor...bCategory2=126
http://i25.photobucket.com/albums/c9...e/IMG_0303.jpg
Evap Check Valve and exhaust weld in nipple, great for any catch can setup $15
http://www.summitracing.com/parts/MOR-97800/
http://www.summitracing.com/parts/MOR-97810/
http://i25.photobucket.com/albums/c9...e/IMG_0310.jpg
Autometer GS Pyrometer Gauge 0-2000egt's with a new temp probe $150
http://i25.photobucket.com/albums/c9...e/IMG_0319.jpg
http://i25.photobucket.com/albums/c9...e/IMG_0324.jpg
Autometer Phantom II Fuel PSI gauge 0-100 (new) $180
http://www.summitracing.com/parts/ATM-7563/
http://i25.photobucket.com/albums/c9...e/IMG_0308.jpg
04.5 Duramax Tow Mirrors. $400 These are the ones that you can extend from inside the truck and will work on 01-07 trucks but 01-02 will need to change connectors to work. One does have a few scratches on the back and a really light scratch on the mirror. They have the turn signals in them too
http://i25.photobucket.com/albums/c9...e/IMG_0287.jpg
http://i25.photobucket.com/albums/c9...e/IMG_0288.jpg
http://i25.photobucket.com/albums/c9...e/IMG_0291.jpg
Stand Alone Fuel cell for a nitrous setup $100 has foam so no sloshing
http://i25.photobucket.com/albums/c9...IMG_0280-1.jpg
http://i25.photobucket.com/albums/c9...e/IMG_0282.jpg
Allison 5 Speed Shift Kit (01-05) $200
http://i25.photobucket.com/albums/c9...IMG_0278-1.jpg
http://i25.photobucket.com/albums/c9...IMG_0277-1.jpg
Transgo Allison Converter Clutch pressure reducer $30
http://www.summitracing.com/parts/TRG-A1-LU-BST-04
http://i25.photobucket.com/albums/c9...IMG_0274-1.jpg
