2jz TT into ECSB Z71

I'm seriously debating pulling out my 6.0 single turbo and dropping in a toyota 2jz stroker engine with twin 67's. For those of you who don't know what that is... its a twin turbo toyota supra engine at 3.4L. At 30 psi it should make about 850hp with torque to boot being a straight six. Is this absurd? Or downright cool as hell. I can't decide. The reason i ask is a friend has this engine and was swapping it into an RX7. Now he wants turbo LSx power. And a Z71 ecsb on 33's with a 10,000 rpm straight six blowing out the 4" exhaust just tickles me. I've never been brand specific anyway, i like variety. I love old flathead V8's as well as triple rotor mazda engines and forced induction anything... I love big v-twin harley engines and i have appreciation for the 2.5L v-10's and v-12's that dominate Formula One . So before you flame me for WTF... i have a bachelors in mechanical engineering and an associtates degree in electrical engineering... i'm not worried about making it happen. All i wanna know is your opinion on it???

Quote:

---

Originally Posted by Warsteiner

I'm seriously debating pulling out my 6.0 single turbo and dropping in a toyota 2jz stroker engine with twin 67's. For those of you who don't know what that is... its a twin turbo toyota supra engine at 3.4L. At 30 psi it should make about 850hp with torque to boot being a straight six. Is this absurd? Or downright cool as hell. I can't decide. The reason i ask is a friend has this engine and was swapping it into an RX7. Now he wants turbo LSx power. And a Z71 ecsb on 33's with a 10,000 rpm straight six blowing out the 4" exhaust just tickles me. I've never been brand specific anyway, i like variety. I love old flathead V8's as well as triple rotor mazda engines and forced induction anything... I love big v-twin harley engines and i have appreciation for the 2.5L v-10's and v-12's that dominate Formula One . So before you flame me for WTF... i have a bachelors in mechanical engineering and an associtates degree in electrical engineering... i'm not worried about making it happen. All i wanna know is your opinion on it???

---

If you're bored and you want to try something new then do it. At least you already have a turbo'ed 6.0. Thats what the majority response is going to be. "Add another turbo to the 6.0 for 75% of the cost less."

do it

Lmao you can easily make more hp and torque boosting your 6.0

Someone recently watched Fast Five.

Take you BS thread to that "other" performance truck site.

Do it!!

http://lolpics.se/pics/482.jpg

Quote:

---

Originally Posted by tanz45

http://lolpics.se/pics/482.jpg

---

2 wasn't enough.

when i read it i literally verped then some one yelled "A couple of Nissan SR20's would pull a premium one week before race wars. "

:lol: at all

didn't someone put a turbo 2jz into a 68-69 camaro?
i'm a big fan of the 2jz myself, my wife has an 01 IS300, but i'm thinking more about buying another one & put an LS1 with a 6 speed in it.

2JZ engine... You can overnight parts from Japan...

yes its a maroon/reddish color car

everyone thinks the 2jz is such a badass motor that it can make power from factory. Has anyone actually seen the numbers a LS motor produces under boost? 2jz doesnt have on a LS motor. not to mention the 2jz is a fortune to R&R if need to be were you can find another LS motor anywere now a days

Quote:

---

Originally Posted by RPM Graphics

didn't someone put a turbo 2jz into a 68-69 camaro.?
i'm a big fan of the 2jz myself, my wife has an 01 IS300, but i'm thinking more about buying another one & put an LS1 with a 6 speed in it.

---

Quote:

---

Originally Posted by ss454327

2JZ engine.. You can overnight parts from Japan...

---

lmao

It'll decimate all if you sink about 15 grand into it.

Quote:

---

Originally Posted by Frenchy

It'll decimate all if you sink about 15 grand into it.

---

lmao and thats way more than whats needed to make a turbo'd Ls make good #s

roughly 700 hp on a stock bottom end, that's pretty impressive & parts for them are pretty easy to get.
i know 2 local guys that put down 800-1000 hp in their street driven supras & i do work for a supra forum that has some pretty impressive cars.
granted i would take an LS over the 2jz, like i said the IS would be a great family car with an ls1 & a 6 speed :) but the 2jz definitely holds it own.

if its all about making numbers why not get a big block?? :hyper2:

People are dumb.

Quote:

---

Originally Posted by sprayedenali

if its all about making numbers why not get a big block?? :hyper2:

---

Says the guy making 7xxrwhp in a 5.3

http://img231.imageshack.us/img231/4...2638bj8cz2.jpg:lolup:

:lolup: but seriously go for it; I think the 2JZ would be better suited on a go-cart frame instead :lol:

we'll see how you do in race wars then we'll talk

Quote:

---

Originally Posted by Warsteiner

I'm seriously debating pulling out my 6.0 single turbo and dropping in a toyota 2jz stroker engine with twin 67's. For those of you who don't know what that is... its a twin turbo toyota supra engine at 3.4L. At 30 psi it should make about 850hp with torque to boot being a straight six. Is this absurd? Or downright cool as hell. I can't decide. The reason i ask is a friend has this engine and was swapping it into an RX7. Now he wants turbo LSx power. And a Z71 ecsb on 33's with a 10,000 rpm straight six blowing out the 4" exhaust just tickles me. I've never been brand specific anyway, i like variety. I love old flathead V8's as well as triple rotor mazda engines and forced induction anything... I love big v-twin harley engines and i have appreciation for the 2.5L v-10's and v-12's that dominate Formula One . So before you flame me for WTF... i have a bachelors in mechanical engineering and an associtates degree in electrical engineering... i'm not worried about making it happen. All i wanna know is your opinion on it???

---

Now that everyone has gotten their awesome jokes out of the way, i will answer seriously from a more reasonable perspective. You want to drop a straight 6 twin turbo into a 4500lb+ vehicle that will rev to 10000rpm because it has the capability of putting down 850hp to the crank. At a 20% drivetrain loss, that would net you +-680. Your streetability is going to be trash. Overall performance will be mediocre. Dont expect the best track times. On top of this, you may have reached the limit of performance with 30 psi. As for cost, you will not only need to get the engine, but the transmission, transfercase and a compatible driveshaft. Who is gonna do all the computer work? What happens if a part breaks, are you gonna run to autozone and pick one up? What if your transmission needs to be rebuilt, are there local ppl dedicated to these motors and transmissions?

On to what you have in your truck. Its a 6.0L single turbo. If you can dyno tune it for a few hours with a respectable tuner, you can achieve 30 psi and around 700hp to the wheels without affecting street manners and close to the same amount of torque. What does a few hours doing a dyno tune cost, about a 100 an hour give or take?

As a mechanical engineer, you should have already considered these factors. Feel free to do the swap. At least you'll go on record as being the first :lol:.

Top that pie with this cherry !!!!!

Your crank will snap trying to move that weigth and begining to make good torque numbers @ 7000 rpm+

Moving those tires will give a normal 18 psi + life to the engine daily driving. Acting like a normal 6.0l

If you consider a nova, malibu from the 70-80's will be a proyect to wait somethimg for.....

But a truck....well....the only achivement is "I did it"

Probably this is not a performance related swap......more like and ego swap, or a super bored guy with a lot of time a money to acomplish it ¡

Is not crazy....it just don't follow too much logic.

Talk to the pros at d-formula and ask them why they swap their mighty blowen 6L for any brand V8 !