Printable View
Just posting up to see if any you local guys want to meet out at Dallas Raceway Friday night.
Me and a few friends will be out there making some passes, shooting the crap and putting back a few cold ones.
http://i886.photobucket.com/albums/a...ceway42211.jpg
would love to come out there and run the new set up but im not gonna be back home for a couple weeks,
ill catch the next one
For sure man, we're going to start going back up there again.Quote:
Originally Posted by T-Stark
im close to tyler so im not real familiar with dallas were is the dallas raceway.
is that the track off of 175 that was built here recently
Its basically in Crandall Texas, about a mile or so East of town on Highway 175.
wasnt it rpm speedway. or is that the dirt track next to it.
Exactly, the dirt track is RPM.
is it a run anything track ive never been and never been down a quater mile.
Yes you can run what your brung during their Test-n-Tunes, you'll be able to race cars, trucks, motorcyles, etc.Quote:
Originally Posted by easye1986
Group of us heading up there in an hour or so to put it down.
Hope some of yall make it.
lmk what your new times are!
Any word
Was a horrible track day compared to my previous best times, but I was pleased with the truck.
March 3rd - DA was 754, 59 degrees, no wind.
60 - 2.01
1/8 - 8.73 @ 79.40
1/4 - 13.49 @ 102.18
April 22nd - DA was 2757, 86 degrees, 15 to 20 mph head wind.
60 - 1.88
1/8 - 8.63 @ 79.57
1/4 - 13.41 @ 101.65
I don't go by these, but always check to see what they are.
03/04 Corrected Times
Stock and Mildly Modified Naturally Aspirated Engines
13.398 @ 102.86 MPH
04/22 Corrected Times
Stock and Mildly Modified Naturally Aspirated Engines
12.97 @ 105.177 MPH
Nice 60 foot. Slicks this time?
Yeah those 60s were with slicks, they dead hook nicely, most runs were 1.88s to 1.90s.
Most all launches were flashing the converter, somethings going on when I stall up high the truck starts lugging down.
Flashing the converter is normally better in NA anyway.Quote:
Originally Posted by double047
Definitely worked better that way, this is my first converter so I'm still learning.