Printable View
some pics of my truck
workin on the old 350
http://i217.photobucket.com/albums/c...61895768_l.jpg
the old motor all cleaned up
http://i217.photobucket.com/albums/c...68d0609ef5.jpg
just mookin the motor up
http://i217.photobucket.com/albums/c...MYBLU70020.jpg
the 5.3 in and lookin good
http://i217.photobucket.com/albums/c...BLU70004-1.jpg
and the body
http://i217.photobucket.com/albums/c...MYBLU70044.jpg
its bagged in the back and in the prosses of being bagged in the front
that is a sick truck
Sweet truck, where are you located? I used to see a truck a lot like that all the time in Shreveport.
Sweet.
What's "mookin"?
I need a trailer like that.
mock up my bad lol
Nice lookin' swap! The original motor looked good as well!
looks good with the sbc but looks even better with the lsx motor. sweet truck man!
yea i love my trailor 24ft titan and its deff..the best bang for the buck. thanks guys yea it took alot to get the old sbc all cleaned up and nice the big thing i did was run all the wires behind the firewall then i also moved the stock battery box to the fire wall and it looks b*tchin for sure. and before i put the lsx in i shaved the firewall. i sold the motor for 1500 who would of thought you could still sell a sbc for that lol:dancenana:
o and im from elk grove CA kinda by sacremento
nice ride bro, 2 of my closest friends live up in nor cal, nice area up there, took some sweet cruises on the 101
Nice! Keep the pics coming!
what all did you have to do to get that in the truck and get it runing? I have a 72 c-10 i'm puting a 99 ls1 in and could use some help.
Nice looking truck, can't wait till my son and I start on our 1971 Chevy LWB....
looks good!
TO shane72.
technically thats what im doing since im using a ls1 intake and ls1 injectors. For the fuel system i used professional products (P.P.) ls1 fuel rails, and P.P. three port fuel pressure regulator, a OBX ( ebay brand but dam good ) inline fuel pump, and OBX fuel filter, i already had a fuel cell in the truck and im sure it will work just fine, then i used about 30' of steel braided -8an hose and a load of an fittings. i just bought my stand alone harness today off of ebay for about 450 bucks shipped. the nice thing about it is has a 5' tail to the comp so you can put the comp were you fell looks the best. then you need a tune to remove the vats and all the smog stuff.you can get that done for anywere from 100 buck to 400+ for like a in car tune witch would be the best way.
any thing else just ask and if i can help i will