92 Sierra 370 swap

Got me a 6.0 out of an 02 Denali to put in my truck. Cracked it opened an two cylinder walls were steam cut from a head gasket leak so I'm boring it out to a 370. Got wiseco pistons and scat I beam rods. Will be getting the 317 heads milled and I have an edelbrock rpm dual plane intake with a Quickfuel 750 carb. Gonna get Martin Smallwood to custom spec me a cam. Have a th350 I will get rebuilt and will be getting a ford 9". Here's a pic of the my truck it's going in.
http://i1349.photobucket.com/albums/...psf8db52e2.jpg

Motor before tearing it apart
http://i1349.photobucket.com/albums/...pse611e044.jpg

Badass pistons!
http://i1349.photobucket.com/albums/...ps9d467692.jpg


Block tore down
http://i1349.photobucket.com/albums/...psf2dee64e.jpg

Heads before and after I cleaned
http://i1349.photobucket.com/albums/...ps675722d3.jpg

http://i1349.photobucket.com/albums/...ps78681023.jpg

Mocked the motor up for some eye candy! Need to get it to the machine shop to get punched out.
http://i1349.photobucket.com/albums/...ps569c3a04.jpg

Welcome to the forum--- good start for a great looking truck!

Welcome and looks like you've got things well under control. Good luck and keep us posted!!!!!

Looks good bud, keep the updates coming

That's a nice looking stepside you got should move out real good with that motor.

That is a BEAUTIFUL truck I'm not sure I'd even pull that thing out of the garage!!'im sure you will love the new found LS power keep us updated with plenty of pics!

Thanks guys. Been workin 70 hour weeks so havent gotten much done just still ordering parts

What motor mounts are you guys running with the schoenfield headers? Dirty dingo?

I used the 1in setback mounts/plates from wisner machine works on ebay with my schoenfelds. I had no problems bolting them up, and got to keep my drive shaft and trans. set right back where it was supposed to.

Good deal man. Also are most of you keeping the stock oil pan? Noticed on some it seemed like they hang pretty low.