LS6 Intake Swap

Quote:

---

Originally Posted by Justblazin

Sorry guys i am a Noob to these trucks. Now I have a 6.0l with z06 can, lifter, rods springs. I have a RCSB. Its a 5-speed. Can I install the z06 intake and still be able to tow?
Thanks

---

Yes you can. But the truck intake will make better torque for towing.

please delete

Quote:

---

Originally Posted by Kruznlow69

does anyone know what you can do for the LS1 waterpump pulley to work with truck accessories? i mocked mine up with truck accessories and had to space the H20 pump pulley out about an inch. deinatly not runnable how i have it... maybe need a billet spacer to keep it centered?

---

you can either pull it out some with a puller for it to line up with the rest of the accessories or pull it completly off and press the truck pulley on it.

please delete

Just Finished My Swap,thanx For The Help And Info Cajun.

Since My Truck Is Cable Tb,do U Kno If The Bracket From The Camaro Would Work?or Do I Also Need The Cable?

Just curious why you tapped a new hole for the valve cover vent and plugged the existing one? Also the PCV goes to the small nipple opposite the brake vacuum on the rear of the manifold, is this correct.

Never mind, figured it out.

where can i get relocation bracket or is it somethin i will have to have fabbed

can either fab one up or buy a longer bolt for the idler pulley, space it out to align with the other pulleys, and place it in the very top hole for the alt and p/s bracket.