i wouldnt think it would. it would still be getting the input from the rear end as long as you dont take those wires out. the ECU will still get the speedo from the trans, as far as I know, it doesnt need the physical speedometer.
Printable View
i wouldnt think it would. it would still be getting the input from the rear end as long as you dont take those wires out. the ECU will still get the speedo from the trans, as far as I know, it doesnt need the physical speedometer.
I would say as far as your transfer case goes to check with Advanced Adapters. They offer a lot. Also don't feel too bad, a lot of people will hate me for saying this but the LS engines share some similarities with the pushrod Fords. Heck the heads from your 302 will bolt right on lol. I would also check with some of the fox body mustang forums. There are a number of those guys doing the swap which should be very helpful.
LALALALALALALALALALA I CANT HEAR YOU.Quote:
Originally Posted by fullthrottle
If Ford had kept designing a pushrod engine rather than OHC it would have ended up being the LS IMO. Also, ever seen a early viper head? Whoever designed the LS head had to be sleepin with the viper developers lol.
Which Ls1 will over plenty of power/ torq and offer decent fuel economy? i was thinking the 5.3 but i am not sure.
The 5.3 would be a good choice and is fairly easy to find for around 500 bucks. But if you can find a 6.0 either a lq4 or lq9 you would like the power much more. They can run around 1200 for a nice one. But it's worth it.
The LQ4/LQ9 would probably actually get better than the 5.3 in that big truck too.Quote:
Originally Posted by fullthrottle
Quote:
Originally Posted by pl4yboy
that would be great. i have a 5,000 dollar parts budget to spend on the engine and tranny with wiring harness. so i am hoping that i can get everything i need with that much
what year did the 6.0 come in and what truck did it have the 4l80e backing it. i might of found a donor automobile but they have about 5 and he ask what year i would want to have the engine tranny and harness from? thanks guys.Quote:
Originally Posted by fullthrottle
99 to 07. They're not rare.