Drove the truck

Well I found out that in April of 05 they made a change in the trannys boost valve and I had to put the stock one back in. Drove around the neighborhood with open exhaust warmed her up gave it half throttle and it squatted down and bolted. I still have to break in the motor and torque converter so I didn't nail it . Thiss thing is faster half throttle than my old TBI. Do these sts Yank 2700 converters make your tranny shift smoother? When this thing shifts its just a little firmer than my stock 04. Funny thing the only gauge that worked was the gas gauge. How do you post these big pics? Thanks :cool:

Congrats on the successful transplant! :thumb:

Congrats!

Thanks guys! I ordered that module from Bakereletronix for the tach, drilled out the adapter above the oil filter for the oil sender which is now working, had to order the 98 camaro water temp sender no one in the area stocked it. Special Thanks to Redheartbeat took all your advice. Problem I have run into is the speedo from 88 to 91 have the VSS buffer built in the cluster, both wires from the VSS run directly into it. does anyone make a converter from the pcm output for this ? :eek:

Add the pics to your sig though the image insert button the one with the pic of a tree. Then copy and paste url address in the box

:pics:

Thanks NalgonaZ71,
See if this works img]http://wwwphotobucket.com/i64[/img]

http://i64.photobucket.com/albums/h1...o/P1000482.jpg
will post more pics later

<div class='quotetop'>QUOTE(Yello91Silverado &#064; May 3 2006, 07&#58;04 PM) [snapback]52024[/snapback]</div>

Quote:

---

Well I found out that in April of 05 they made a change in the trannys boost valve and I had to put the stock one back in. [/b]

---

LOL, I just went through the same thing a few weeks ago, had to put the short stock one back in. Glad to hear I wasn&#39;t the only one ahahahah.

Congrats on the swap&#33; I bet it runs strong&#33;


allen