I have a 5.3L with 4l60e trans from an '05 silverado going in my '96 GMC Sierra.
The new engine has the exhaust manifolds and about 6" of the pipe behind the flange. Can I use my stock y pipe?
Will my drive shaft work with this?
Printable View
I have a 5.3L with 4l60e trans from an '05 silverado going in my '96 GMC Sierra.
The new engine has the exhaust manifolds and about 6" of the pipe behind the flange. Can I use my stock y pipe?
Will my drive shaft work with this?
The driveshaft will work. No on the y-pipe. Schoenfeld headers.
If you have the 5.3 Y-pipe,you can cut,fabricate and weld it to mate up with your 95 exhaust,I wouldn't recommend it unless you are familiar with that kind of work,or have a good muffler shop nearby.