Want to build Forged 6.0l motor for turbo setup

what I am currently looking at getting...

LQ4 or LQ9 6.0l block
Bore .030 Over
Wiseco K396X3 pistons (4.030 bore, 6.125" rod, -32cc reverse dome, wrist pins included)
Wiseco File fit ring set
K1 CH6125ALLB-LS8 Forged Rods (6.125", 2.1 shaft size, .927 wrist pin, ARP2000 bolts)
Scat 4340 Forged crank
Clevite LS1 MS2199P Main & Rod bearings
Clevite LS1 (03-05) SH1995S Cam Bearings
ARP 2000 Main Bolts (I dont know what the correct part # is though?)
Patriot Assembled CNC Ported Heads (PN 2013) LS6/LS2 heads 64cc Combustion chamber
Professional Products LS2 96mm Inlet Intake manifold (pN 52065) includes billet fuel rails

Do all of those parts look correct? Anything else i will need to put this together? i want to support around 800-900 rwhp with a twin turbo setup...

Can anyone also recommend a good cam to use?
Recommend good pushrods?
and also on anything else I will need to build this engine...

THANKS

Not to be a jerk, but your handle is misspelled if you're trying to say that you are faster THAN me.

If you are spending that dough, get a cam custom spec'd for your SPECIFIC application and goals.

TruckinL33... Seriously? You HAD to post that dumbass obvious comment in my post? I spelled it that way to intentionally make people think when they see it...

Where can i get a custom ground cam done SCIV? Thanks for the help!

Does everything else sound good? i was thinking about running the FRPP 80lb high impedence injectors. Is that enough fuel if I run them at around 50psi instead of the 43.5 they were specd at?

Allen Nelson can have one spec'ed out for you. He had one done for me and it is the best cam I have had for a boosted application. The funny thing is that it is a small small cam for my motor and it has gobbs and gobbs of TQ and HP!

Just trying to help you out. How was I supposed to know what your name ment when you didn't post up in "newbies" first with an explenation? Sorry dude, take it easy.

Thats overkill for your goals, but thats not a bad thing. You sound like your on track for a serious build. Check out my garage to see a similar setup and specs on what im running.

i'd talk to casey about the engine he has foresale ;)

Can you send me a link to that engine, skeet?