-
well i just got my shortblock and im ordering my heads/cam this week....ap engineering cnc s1's that flow s2 #'s :rock: ...flow #'s and a futral f7 blower cam 224"/230" .586"/.591" 114LSA or a tr 224/227 .563/.569 114 LSA blower cam b/c a procharger is in the future, my question is dont i need to upgrade my injectors? i heard 6.0l will do the job but im not certain, should i just buy the whole 6.0l intake assembly w/ injectors if i can get it for $150-175? any other ideas? i also need to know what parts i am going to need to change my auto for the t56 (2002 sierra), i know i need the pedals the crossmember a new drive shaft..........what about the slave and master?
-
slave you might can get with the tranny..if you dont the f-body slave for that year motor is what you'll need. you'll need a master cylinder from a 99+ manual truck and might have to modify/lengthen the lines.
cant help on the injecters
-
-
Just run the injectors you have and check the duty cycle. I think as long as it's under 80% those will do just fine.
