-
will ext. cab springs work on a reg cab? someone told me they will but instead of lowering it 3" it will lower it 2". also where is a good place to get hangers?
-
How much lower do you want it? I have the DJM 4/6 drop on my truck. Before that I had the Belltech shackle/hanger kit in the back and for some reason it rode like krap, the back would always bottom out. For some reason that kit made the springs lose there support. The DJM is a flip kit out back and lower control arms out front which use the factory coil springs. It rides great 
99 Pewter SCSB
DJM 4/6 drop, Hotchkis front/reat swaybars,Hypertech power programer, milled & built heads, Accel wires, distributer,coil, Mass Air Flow Sensor(mti motor sports, Granatelli),Dynomax UltraFlow Stainless, 17x8.5 Eagle Alloys, Escalade door handles, Suburban front grille, with clear corners and billet bowtie,Street Scene mirrors, Cowl Hood
-
i just want a 2/4 drop.i bought 3" belltech ext. cab springs off of ebay for $30 shipped and i already have a 2" shackle on my truck so i was going to get the hanger and drop the rear 2 more inches. i dont want to do the flip kit it is to low for me.
-
Well how did it go? Is everything installed and how did it turn out?
99 Pewter SCSB
DJM 4/6 drop, Hotchkis front/reat swaybars,Hypertech power programer, milled & built heads, Accel wires, distributer,coil, Mass Air Flow Sensor(mti motor sports, Granatelli),Dynomax UltraFlow Stainless, 17x8.5 Eagle Alloys, Escalade door handles, Suburban front grille, with clear corners and billet bowtie,Street Scene mirrors, Cowl Hood
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Reply With Quote
